• AKCP 4-20mA Converter Includes 5 ft connector

The 4-20 mAmp signal converter is used to integrate the sensorProbe with a 4-20 mAmp transmitter. 4-20 mAmp technology is used to communicate analog signals over long distances where electrical interference is a problem. This solution is often used in the process control industry to collect the analog values from a wide array of remote sensors.

Current signals are much less susceptible to noise than voltage signals. A voltage signal can be converted to current and then broadcast over a long distance before it is converted back to voltage and read by the sensorProbe.

4-20 mAmp transmitters are common in the industry for use with high quality sensors. With the 4-20 mAmp converter these sensors can now be integrated into the sensorProbe enhancing their value with the addition of graphing, web interface, email interface, thresholds, and limits.

  • Converts current levels from 4 - 20 mA to 0.8 - 4.0 V voltage levels
  • Maximum linearity of ± 0.09%
  • Maximum accuracy of ± 0.15%
  • Operates from a single +5 V DC Power Supply which powered by the sensorProbe
  • Fully Rated Over the -40°C to 85°C Industrial Temperature Range
  • 2 LED show status of the current loop and the power supply
  • Up to two I-V converters per sensorProbe2, 8 per sensorProbe8


Input Current Range : +4 mA to +20 mA
Output Voltage Range : +0.8 V to +4.0 V
Linearity : ± 0.09 % Full Scale, Maximum
Accuracy : ± 0.15% Full Scale (± 0.3% Full Scale, Maximum)
Power Supply : +5 V DC
Power Consumption : Typical 120.20 mWatt, 24.04mA
Operating Temperature : -40°C to 85°C
Input Connector : Two terminal, Iin(+) and Iin(-), for current loop
Output Connector : RJ45 jack to converter using UTP Cat 5 wire
Mechanical Dimensions : 65(W) x 62(H) x 15(D) mm Weight: 80 grams

Write a review

Please login or register to review

AKCP 4-20mA Converter Includes 5 ft connector

  • $125.00

Are you a VAR / Distributor?
Up to 15% Commission.
No MOQs. No Signup Fees.

Tags: akcp, 4, 20ma, converter, includes, 5, ft, connector

Featured Article

Portable Server Room Diagnostic Sensor Toolkit

Despite advances in CFD software and pre-deployment simulations of data center environments. The majority of server rooms, remote sites and data centers are not designed to handle ever increasing loads and the heat generated by that increased activity.

WIRELESS WORKFLOW enables early diagnostics of any server room or data center facility. Detecting problems arising from under or over cooling, hot air re-circulation in IT rack space and air delivery resulting in high or low air pressure in raised floors and dropped ceiling plenums.

Read the full article

Diagnosing server room temperature problems

Diagnose temperature differentials, pressure differentials and more...

AVTECH Room Alert 12E - Sensor Monitoring

Monitor temperature, humidity, power, room access and more...

AKCP SP2+ Temperature Monitoring

SP2+ monitors and logs temperature, humidity and more. SNMPv3 compliant, encrypted email and more...

Smart Cooling for Data Centers

Keeping temperatures in ASHRAE safe thermal envelopes.

AKCP SP2+ Temperature Sensor for Server Rooms

Front and rear thermal mapping for any server cabinet.

NTI Enviromux Micro-T SNMP Temperature Sensor

Monitor and manage server room environmental and security conditions over an IP network.

CTSI Limited - Complete Technology Systems Integration

At CTSI we've worked with some of the largest companies in the world, bringing our expertise to bear on many complex server room monitoring projects. Feel free to contact us today at sales@ctsilimited.com and make your project a success.