• AKCP AC-Sensor Controlled Relay Normally Close (110V)  

The Sensor Controlled Relay can control the electrical power to devices managed over the Internet. With easy configuration and integration with the sensorProbe product series. The Sensor Controlled Relay defines a new era in energy management.

The Sensor Controlled Relay is easily controlled by any of AKCess Pro's extensive selection of sensors. The relay can provide automatic responses to sensor alerts. This is useful, for example, to switch on the fan when the room temperature rises beyond the threshold level or to turn on a light when the motion detector is triggered. Setting up the Sensor Controlled Relay is easy with its built in autosense feature and user friendly web interface.

SNMP Compatible

The Sensor Controlled Relay can also be controlled via external computers using the included snmp command line utilities either interactively or programmatically. In addition the Sensor Controlled Relay can be controlled via the integrated we interface on the sensorProbe.

Advanced Materials

The Sensor Controlled Relay includes Metal Oxide Varistors (MOVs) and Snubber circuits to protect the open contacts of the relay from high voltage spikes or noise transients. It monitors the power and load & will accept a control signal which is sent from the sensorProbe or securityProbe base unit.

A simple, point and click web manager can set link the Sensor Controlled Relay to a sensor. When the sensor goes to the chosen state, for example, High Critical, the Relay can be made to Cycle, which will turn on and then turn off the external device for the selected period of time. In this case, when the sensor goes High Critical, the automatic response system will Cycle the relay for 20 seconds. Users can easily change the fields in the Relay Settings Menu according to their needs using the dropdown list boxes.

Increased Response Time

The Sensor Controlled Relay with the automatic response feature can give the users more flexibility in responding to the environmental alerts. Automatic response eliminates the need for the user intervention during the alarm condition.

The Sensor Controlled Relay has a built in fuse that provides protection for the external devices from possible damage due to over voltages or high current.

Status of The Sensor Controlled Relay is reported by 4 LEDs on the board. Remote monitoring of the status is available using SNMP traps, web interface, e-mail and SMS.


  • Relay designed to control mains line voltage – 110VAC, in the US, 220VAC in the EU.
  • IEC connector rating is 10 Amps for 220VAC and 10 Amps for 110VAC
  • Operates from a single +5 V DC Power Supply from the sensorProbe. Power cords supplied support maximum 6A
  • Metal Oxide Varistors (MOVs) and snubber circuit protect the open contacts of the relays from high voltage spikes.
  • 4 LEDs indicate the status of the Relay, Power Supply, AC Line Voltage and AC Load Voltage.
  • Up to 2 Sensor Controlled Relays per sensorProbe2. Up to 8 Sensor Controlled Relays per sensorProbe8, securityProbe, securityProbe 5E or E-sensor8 expansion module.
  • Full auto-sense including disconnect alarm.

Relay Ratings

  • IEC connector rating is 10 Amps for 220VAC and 10 Amps for 110VAC
  • Contact Material AgCdO
  • Carry Current 10 Amps
  • Max. Operating Voltage 380 VAC, 125 VDC
  • Max. Operating Current 10 Amps
  • Max. Switching Capacity 4,000 VA, 480W with Resistive Load 2,000 VA, 240W with Inductive Load (P.F=0.4)
  • Power Consumption: Typical 471.00 mWatt, 94.20mA
  • 10 Amps Fuse 380 VAC, 125 VDC


Input Voltage 110VAC (US Version) – 220 VAC (EU Version)
Output Voltage 110 VAC (US Version) – 220 VAC (EU Version)
Dimensions 115 x 80 x 40 mm
Operating Temperature -40°C to 85°C
Storage Temperature -40°C to 85°C
  The Sensor Controlled Relay can be extended from the RJ-45 Intelligent Sensor ports on the base units up to 100 feet, or 30 meters using standard CAT5/6 LAN cable

Write a review

Please login or register to review

AKCP AC-Sensor Controlled Relay Normally Close (110V)  

  • $125.00

Are you a VAR / Distributor?
Up to 15% Commission.
No MOQs. No Signup Fees.

Tags: akcp, ac, sensor, controlled, relay, normally, close, 110v

Featured Article

Portable Server Room Diagnostic Sensor Toolkit

Despite advances in CFD software and pre-deployment simulations of data center environments. The majority of server rooms, remote sites and data centers are not designed to handle ever increasing loads and the heat generated by that increased activity.

WIRELESS WORKFLOW enables early diagnostics of any server room or data center facility. Detecting problems arising from under or over cooling, hot air re-circulation in IT rack space and air delivery resulting in high or low air pressure in raised floors and dropped ceiling plenums.

Read the full article

Diagnosing server room temperature problems

Diagnose temperature differentials, pressure differentials and more...

AVTECH Room Alert 12E - Sensor Monitoring

Monitor temperature, humidity, power, room access and more...

AKCP SP2+ Temperature Monitoring

SP2+ monitors and logs temperature, humidity and more. SNMPv3 compliant, encrypted email and more...

Smart Cooling for Data Centers

Keeping temperatures in ASHRAE safe thermal envelopes.

AKCP SP2+ Temperature Sensor for Server Rooms

Front and rear thermal mapping for any server cabinet.

NTI Enviromux Micro-T SNMP Temperature Sensor

Monitor and manage server room environmental and security conditions over an IP network.

CTSI Limited - Complete Technology Systems Integration

At CTSI we've worked with some of the largest companies in the world, bringing our expertise to bear on many complex server room monitoring projects. Feel free to contact us today at sales@ctsilimited.com and make your project a success.