The AC voltage detector is used to indicate the presence or absence of line voltage. This is useful, for example to tell when the UPS is running on battery power.
The AC Voltage Detector indicates an ALARM/NORMAL condition in software and also via an LED mounted on the sensor. Voltage detectors can detect the presence or the absence of line voltage. It is designed for use worldwide. There is an SNMP interface for getting the alarm/normal status. SNMP traps are sent when critical conditions occur.
SNMP polling via 'get' is available to retrieve existing status and configuration parameters. The Web browser interface is also available to display the status and configuration parameters.
When an alarm condition is activated the description and location of the fault can be sent via email, page or traps.
|Measurement Range :||Detects voltage at 50V AC to 250 VAC|
|Measurement Indication :||Alarm or Normal|
|Communications Cable :||RJ45 jack to sensor using UTP Cat 5 wire|
|Sensor Type :||Open/closed contact switch|
|Power Source :||Powered by the sensorProbe. No additional power needed|
|Power Consumption :||Typical 11.35 mWatt, 2.27mA|
|Measurement Rate :||Multiple readings every second|
|LED indicator on sensor shows if voltage present|
|sensorProbe auto detects the presence of the voltage sensor|
|Up to 2 voltage detector per sensorProbe2, up to 8 on the sensorProbe8|
|Full autosense including disconnect alarm|
AKCP AC Voltage Sensor Includes 5 ft Cable
- Brand: AKCP - sensorProbe2, securityProbe series
- Product Code: AKCP ACV00
- Availability: In Stock Ships in 1-2 days
Are you a VAR / Distributor?
Up to 15% Commission.
No MOQs. No Signup Fees.
Portable Server Room Diagnostic Sensor Toolkit
Despite advances in CFD software and pre-deployment simulations of data center environments. The majority of server rooms, remote sites and data centers are not designed to handle ever increasing loads and the heat generated by that increased activity.
WIRELESS WORKFLOW enables early diagnostics of any server room or data center facility. Detecting problems arising from under or over cooling, hot air re-circulation in IT rack space and air delivery resulting in high or low air pressure in raised floors and dropped ceiling plenums.Read the full article
Diagnosing server room temperature problems
Diagnose temperature differentials, pressure differentials and more...
AVTECH Room Alert 12E - Sensor Monitoring
Monitor temperature, humidity, power, room access and more...
AKCP SP2+ Temperature Monitoring
SP2+ monitors and logs temperature, humidity and more. SNMPv3 compliant, encrypted email and more...
Smart Cooling for Data Centers
Keeping temperatures in ASHRAE safe thermal envelopes.
AKCP SP2+ Temperature Sensor for Server Rooms
Front and rear thermal mapping for any server cabinet.
Monitor and manage server room environmental and security conditions over an IP network.