• AKCP Air Velocity Transmitter

The AKCP Air Velocity Transmitter is designed for systems that generate heat, and a steady flow of air is necessary to dissipate this in order to maintain system reliability and safety.

The Air Velocity Transmitter sensor is placed in the path of the air stream, where the user can monitor the status and the amount of the flowing air. The sensorProbe or securityProbe web interface shows this information using a percentage and graphical display. In addition to an on/off indication, it also graphs the analog values over a period of time. If, for example, the air flow decreases the web interface will show an indication of change over time.

In addition to the web interface readings the sensor has its own SNMP OID for alarm/normal status and to get the current analog value. SNMP traps are sent when critical. polling via SNMP get is also available.

Case Study

One example of how the AKCP Air Velocity Transmitter can be utilized in a data centre where vented server cabinets are used to sequester the hot return air from the equipment in the server racks is described below.

The AKCP Air Velocity Transmitters were installed using the special mounting brackets in the return air duct of each cabinet to measure the relative air movement through each cabinet and to be alerted when airflow through any cabinet became disproportionate to the thermal load in that cabinet. This ensures that only the specific amount of air needed to cool the equipment in that server rack is allowed through the cabinet.

The AKCP Air Velocity Transmitter combined with the AKCP sensorProbe8 base unit provides an affordable solution that scales well if future expansion is required needing additional cabinets.

In todays advanced energy-efficient facilities where energy consumption is carefully monitored and target PUE's need to be strictly adhered to and controlled, the AKCP Air Velocity Transmitters installed in these cooling systems combined with our sensorProbe8 unit provides the perfect solution by very carefully maintaining an appropriate airflow through each cabinet.

Features

  • On/off and % thresholds alarm signal of airflow
  • Airflow data graphically displayed of over time
  • Accurate, cost effective flow sensing
  • Includes Duct mounting bracket
  • Base unit auto detects the presence of the airflow sensor
  • Up to 2 airflow sensors per sensorProbe2, 8 per sensorProbe8 and securityProbe
  • Air Velocity Transmitter can be extended to your desired cable length using one of our CAT5 extension cables, CABXX, or you can provide your own cable of any length up to 60 feet.

Specifications

Data Collection via Network Management
Measurement Rate one reading each second, data logging once per minute
Communication Cable RJ45 jack to sensorProbe
Sensor Type Thermal Flow Chip
Sensor Power 24 VDC ±10% (power adapter included)
Current Consumption Typical 150mA
Installation Method For Duct-mounting
Housing Material PC fire-proof type
Housing Dimensions 80mm x 80mm x 38mm
Weight 147g
Probe Length 224mm
Probe Material Stainless Steel
Trap Information Warning sensor number, Sensor description, Airflow(%)

Write a review

Please login or register to review

AKCP Air Velocity Transmitter

  • $220.00



Are you a VAR / Distributor?
Up to 15% Commission.
No MOQs. No Signup Fees.

Tags: akcp, air, velocity, transmitter



Featured Article

Portable Server Room Diagnostic Sensor Toolkit

Despite advances in CFD software and pre-deployment simulations of data center environments. The majority of server rooms, remote sites and data centers are not designed to handle ever increasing loads and the heat generated by that increased activity.

WIRELESS WORKFLOW enables early diagnostics of any server room or data center facility. Detecting problems arising from under or over cooling, hot air re-circulation in IT rack space and air delivery resulting in high or low air pressure in raised floors and dropped ceiling plenums.

Read the full article

Diagnosing server room temperature problems

Diagnose temperature differentials, pressure differentials and more...


AVTECH Room Alert 12E - Sensor Monitoring

Monitor temperature, humidity, power, room access and more...


AKCP SP2+ Temperature Monitoring

SP2+ monitors and logs temperature, humidity and more. SNMPv3 compliant, encrypted email and more...

Smart Cooling for Data Centers

Keeping temperatures in ASHRAE safe thermal envelopes.


AKCP SP2+ Temperature Sensor for Server Rooms

Front and rear thermal mapping for any server cabinet.


NTI Enviromux Micro-T SNMP Temperature Sensor

Monitor and manage server room environmental and security conditions over an IP network.


CTSI Limited - Complete Technology Systems Integration

At CTSI we've worked with some of the largest companies in the world, bringing our expertise to bear on many complex server room monitoring projects. Feel free to contact us today at sales@ctsilimited.com and make your project a success.