• AKCP CURRENT TRANSFORMER METERS - 120/208V 60Hz

The AKCess Pro Power Monitor Sensor gives vital information and allows you to remotely monitor power eliminating the need for manual power audits as well as providing immediate alerts to potential problems. The AKCess Pro Power Monitor Sensor is specifically designed to be used with AKCess Pro's securityProbe base units.

It has been integrated into the securityProbe's web interface with its own "Power Management" menu, allowing up to six three phase and fourteen single phase Power Monitor Sensors to be set up on a single securityProbe. More PMS can be connected to a single base unit depending on what readings are required.

Data collected voer time using the Power Monitor sensor can also be viewed using the built in graphing tool. Combining this durable Power Monitor Sensor with the securityProbe creates an IP-enabled power monitoring capable of monitoring / measuring :

  • Phase Line Voltages
  • Current
  • Power Factor
  • Active Energy
  • Active Power

Create alert notifications using the Rich Notification Suite and choose any combination of these alert options:

  • SMS
  • Email
  • MMS
  • Telephone call
  • Fax
  • SNMP
  • Relay switch automates corrective action.

This four-wire sensor is encased in sturdy white plastic and mounts on a 35mm DIN rail. Order it for 110 or 220 power supplies. It functions with single- or three-phase circuits, and meets international standards for active and reactive energy - IEC 62053-21 and IEC 62053-23, respectively.

The change from our previous type PMS to this type of Power Monitor Sensors provides improvements to the hardware design and quality. Providing a much more stable product with enhanced performance.

Note: Installation should be performed by licensed electricians familiar with applicable codes and regulations.

Specifications

  Single Phase Meter Three Phase Meter Three Phase Meter - CT Type
Voltage(V)
Rated Voltage (Un) 230 VAC 230/400V AC (3~) 230/400V AC (3~)
Voltage range 0.7~1.3Un 161/279 - 300/520V AC (3~) 161/279 - 300/520V AC (3~)
Current(A)
Basic current (lb) 10A 10A 1.5A
Maximum current 100A 100A 6A
Operational Current Range 0.4% Ib- lmax 0.4% Ib- lmax 0.4% Ib- lmax
Over Current Withstand 30Imax for 0.01s 30Imax for 0.01s 30Imax for 0.01s
Internal Power Consumption ≤2W / 10VA ≤2W / 10VA per phase ≤2W / 10VA per phase
Frequency(Hz) 50~60Hz ±10% 50Hz ±10% 50Hz ±10%
Standards IEC 62053-21 IEC 62053-21 IEC 62053-21
Temperature range( ํํC)
Operating Temperature -10°C - +50°C -10°C - +50°C -10°C - +50°C
Operating Humidity ≤ 75% ≤ 75% ≤ 75%
Accuracy Class
Voltage ±0.5% ±0.5% ±0.5%
Amps ±0.5% ±0.5% ±0.5%
Frequency (Hz) ±0.2% ±0.2% ±0.2%
Communication
Type RS485 RS485 RS485
Standard Modbus Modbus Modbus
Dimensions(L*W*H) (cm)
Height 100 mm 130 mm 130 mm
Width 76 mm 126 mm 126 mm
Depth 65.5 mm 65 mm 65 mm
Max Diameter Cable 11.5 mm    
Weight 0.35 Kg 0.7 Kg (net) 0.7 Kg (net)

Dimensions

Write a review

Please login or register to review

AKCP CURRENT TRANSFORMER METERS - 120/208V 60Hz

  • $470.00



Are you a VAR / Distributor?
Up to 15% Commission.
No MOQs. No Signup Fees.

Tags: akcp, current, transformer, meters, 120, 208v, 60hz



Featured Article

Portable Server Room Diagnostic Sensor Toolkit

Despite advances in CFD software and pre-deployment simulations of data center environments. The majority of server rooms, remote sites and data centers are not designed to handle ever increasing loads and the heat generated by that increased activity.

WIRELESS WORKFLOW enables early diagnostics of any server room or data center facility. Detecting problems arising from under or over cooling, hot air re-circulation in IT rack space and air delivery resulting in high or low air pressure in raised floors and dropped ceiling plenums.

Read the full article

Diagnosing server room temperature problems

Diagnose temperature differentials, pressure differentials and more...


AVTECH Room Alert 12E - Sensor Monitoring

Monitor temperature, humidity, power, room access and more...


AKCP SP2+ Temperature Monitoring

SP2+ monitors and logs temperature, humidity and more. SNMPv3 compliant, encrypted email and more...

Smart Cooling for Data Centers

Keeping temperatures in ASHRAE safe thermal envelopes.


AKCP SP2+ Temperature Sensor for Server Rooms

Front and rear thermal mapping for any server cabinet.


NTI Enviromux Micro-T SNMP Temperature Sensor

Monitor and manage server room environmental and security conditions over an IP network.


CTSI Limited - Complete Technology Systems Integration

At CTSI we've worked with some of the largest companies in the world, bringing our expertise to bear on many complex server room monitoring projects. Feel free to contact us today at sales@ctsilimited.com and make your project a success.