The AKCess Pro Power Monitor Sensor gives vital information and allows you to remotely monitor power eliminating the need for manual power audits as well as providing immediate alerts to potential problems. The AKCess Pro Power Monitor Sensor is specifically designed to be used with AKCess Pro's securityProbe base units.
It has been integrated into the securityProbe's web interface with its own "Power Management" menu, allowing up to six three phase and fourteen single phase Power Monitor Sensors to be set up on a single securityProbe. More PMS can be connected to a single base unit depending on what readings are required.
Data collected voer time using the Power Monitor sensor can also be viewed using the built in graphing tool. Combining this durable Power Monitor Sensor with the securityProbe creates an IP-enabled power monitoring capable of monitoring / measuring :
- Phase Line Voltages
- Power Factor
- Active Energy
- Active Power
Create alert notifications using the Rich Notification Suite and choose any combination of these alert options:
- Telephone call
- Relay switch automates corrective action.
This four-wire sensor is encased in sturdy white plastic and mounts on a 35mm DIN rail. Order it for 110 or 220 power supplies. It functions with single- or three-phase circuits, and meets international standards for active and reactive energy - IEC 62053-21 and IEC 62053-23, respectively.
The change from our previous type PMS to this type of Power Monitor Sensors provides improvements to the hardware design and quality. Providing a much more stable product with enhanced performance.
Note: Installation should be performed by licensed electricians familiar with applicable codes and regulations.
|Single Phase Meter||Three Phase Meter||Three Phase Meter - CT Type|
|Rated Voltage (Un)||230 VAC||230/400V AC (3~)||230/400V AC (3~)|
|Voltage range||0.7~1.3Un||161/279 - 300/520V AC (3~)|
|Basic current (lb)||10A||10A||1.5A|
|Operational Current Range||0.4% Ib- lmax||0.4% Ib- lmax||0.4% Ib- lmax|
|Over Current Withstand||30Imax for 0.01s||30Imax for 0.01s||30Imax for 0.01s|
|Internal Power Consumption||≤2W / 10VA||≤2W / 10VA per phase||≤2W / 10VA per phase|
|Frequency(Hz)||50～60Hz ±10%||50Hz ±10%||50Hz ±10%|
|Standards||IEC 62053-21||IEC 62053-21||IEC 62053-21|
|Temperature range( ํํC)|
|Operating Temperature||-10°C - +50°C||-10°C - +50°C||-10°C - +50°C|
|Operating Humidity||≤ 75%||≤ 75%||≤ 75%|
|Height||100 mm||130 mm||130 mm|
|Width||76 mm||126 mm||126 mm|
|Depth||65.5 mm||65 mm||65 mm|
|Max Diameter Cable||11.5 mm|
|Weight||0.35 Kg||0.7 Kg (net)||0.7 Kg (net)|
AKCP CURRENT TRANSFORMER METERS - 277/480V 60Hz
- Brand: AKCP - sensorProbe2, securityProbe series
- Product Code: AKCP PMS277-CT60
- Availability: In Stock Ships in 1-2 days
Are you a VAR / Distributor?
Up to 15% Commission.
No MOQs. No Signup Fees.
Portable Server Room Diagnostic Sensor Toolkit
Despite advances in CFD software and pre-deployment simulations of data center environments. The majority of server rooms, remote sites and data centers are not designed to handle ever increasing loads and the heat generated by that increased activity.
WIRELESS WORKFLOW enables early diagnostics of any server room or data center facility. Detecting problems arising from under or over cooling, hot air re-circulation in IT rack space and air delivery resulting in high or low air pressure in raised floors and dropped ceiling plenums.Read the full article
Diagnosing server room temperature problems
Diagnose temperature differentials, pressure differentials and more...
AVTECH Room Alert 12E - Sensor Monitoring
Monitor temperature, humidity, power, room access and more...
AKCP SP2+ Temperature Monitoring
SP2+ monitors and logs temperature, humidity and more. SNMPv3 compliant, encrypted email and more...
Smart Cooling for Data Centers
Keeping temperatures in ASHRAE safe thermal envelopes.
AKCP SP2+ Temperature Sensor for Server Rooms
Front and rear thermal mapping for any server cabinet.
Monitor and manage server room environmental and security conditions over an IP network.