The Security sensor is a magnetic on/off switch for monitoring doors and windows. When the door, or window, opens the input signal is detected by the sensorProbe or securityProbe base unit. Alerts can then be generate to notify you even including images captured from an attached camera to give you instant visual feedback on the situation.
They are active switches that close when one half of the sensor is in close proximity to its mate. When the two sensor pairs are moved apart from each other they open. The base unit senses closure and opening of these switches.
- Unlimited number can be wired in series using one
- Intelligent sensor port
- SNMP OID for monitoring across a network
- No reasonable limitation on distance from base
- sensorProbe or securityProbe unit
- Powered by base unit, no additional power source required.
|Measurement Range||Alarm or Normal|
|Communications Cable||RJ45 jack to sensor using UTP Cat 5 wire|
|Sensor Type||Open/closed contact switch|
|Power source||Powered by the sensorProbe. No additional power needed|
|Power Consumption||Typical 8.95 mWatt, 1.79mA|
|Measurement Rate||Multiple readings every second|
|Maximum extension cable length 305m (1000 ft.) with approved low capacitance shielded cable or UTP|
|sensorProbe auto detects the presence of the security sensor|
|Up to 2 security sensors per sensorProbe2, 8 per sensorProbe8 and securityProbe|
|Full autosense including disconnect alarm|
AKCP Customized - Security Sensor 1 ft
- Brand: AKCP - sensorProbe2, securityProbe series
- Product Code: AKCP SS01
- Availability: In Stock Ships in 1-2 days
Are you a VAR / Distributor?
Up to 15% Commission.
No MOQs. No Signup Fees.
Portable Server Room Diagnostic Sensor Toolkit
Despite advances in CFD software and pre-deployment simulations of data center environments. The majority of server rooms, remote sites and data centers are not designed to handle ever increasing loads and the heat generated by that increased activity.
WIRELESS WORKFLOW enables early diagnostics of any server room or data center facility. Detecting problems arising from under or over cooling, hot air re-circulation in IT rack space and air delivery resulting in high or low air pressure in raised floors and dropped ceiling plenums.Read the full article
Diagnosing server room temperature problems
Diagnose temperature differentials, pressure differentials and more...
AVTECH Room Alert 12E - Sensor Monitoring
Monitor temperature, humidity, power, room access and more...
AKCP SP2+ Temperature Monitoring
SP2+ monitors and logs temperature, humidity and more. SNMPv3 compliant, encrypted email and more...
Smart Cooling for Data Centers
Keeping temperatures in ASHRAE safe thermal envelopes.
AKCP SP2+ Temperature Sensor for Server Rooms
Front and rear thermal mapping for any server cabinet.
Monitor and manage server room environmental and security conditions over an IP network.