• AKCP E-Sensor8 Expansion Module (8 Intelligent Sensor Ports)

The E-sensor8 is an expansion module that has 8 RJ-45 intelligent sensor ports and is connected to any of the 4 RJ-45 expansion ports located on the front panel of the securityProbe 5E base units. They are connected using standard CAT5 LAN cable.

The E-Sensor8 may also be daisychained using the E-Out/E-In ports on other expansion boards.

Complete Connectivity

Any sensor within AKCess Pro's complete line of intelligent sensors can be connected to the intelligent sensor ports which are located on the rear of the unit. 16 LED's on the front provide each sensors visual condition, 8x red for status and 8x green for online.

The expansion boards can be daisy chained together using the units input, or E-in and output, E-out port. These also are RJ-45 ports and use standard CAT5 cable.

These E-Boards can be extended from the securityProbe 5Es base unit or from each other up to 300 meters, or roughly 1000 feet.

OID's for checking the Expansion Boards and securityProbe 5E:

The OID will start with . for checking the sensors on the expansion modules including the E-Sensor8.

This SNMPwalk command . can be used for checking all of the sensors on the securityProbe 5E.

This SNMPwalk command . can be used for returning the status of the expansion modules.



  • Size : 8.5" x 5.43" x 1.80" 
  • Weight : 0.8 Kg

Status Indication

  • LED indication for Power
  • LED for E-module connectivity
  • LED for dry contact status
  • LED for Network Connectivity
  • Disconnect alarm notification from securityProbe 5E base unit
  • LED for sensor online and threshold status


  • Rack mount brackets included
  • Compatible with AKCess Pro DIN and tray rackmount kits

Power Requirements

  • Voltage 7.0 – 9 VDC, 3Amp

Operating Environment

  • Temperature : Min. -35° C Max. +55° C
  • Humidity : Min. 20% - Max. 80% (Non-Condensing) 


  • Configurable output signals (0VDC/5VDC) on any of the 
    8 RJ-45 sensor ports
  • 1 RJ-45 expansion module output (E-out)


  • 8x RJ-45 ports for connecting AKCess Pro sensors
  • 1x RJ-45 expansion module input (E-in)


  • 400,000 Hours


  • Manufactured using highly integrated,low power surface mount technology to ensure long term reliability.

Power Consumption

  • Typical 6.150 Watt, 0.82A


  • Daisy chain multiple E-modules including E-sensor8 and E-opto16 combined
  • Uses standard RJ-45 connections and CAT5 LAN cable
  • Data transfer rate: 115.2 KBPS
  • Maximum extension cable run length: 300 meters (1000 feet)
  • 1 RJ-45 expansion module input (E-in)
  • 1 RJ-45 expansion module output (E-out)
  • Compatible with AKCess Pros complete line of intelligent sensors
  • Connect up to 500 AKCess Pro intelligent sensors to one securityProbe 5E



Write a review

Please login or register to review

AKCP E-Sensor8 Expansion Module (8 Intelligent Sensor Ports)

  • $300.00

Are you a VAR / Distributor?
Up to 15% Commission.
No MOQs. No Signup Fees.

Tags: akcp, e, sensor8, expansion, module, 8, intelligent, sensor, ports

Featured Article

Portable Server Room Diagnostic Sensor Toolkit

Despite advances in CFD software and pre-deployment simulations of data center environments. The majority of server rooms, remote sites and data centers are not designed to handle ever increasing loads and the heat generated by that increased activity.

WIRELESS WORKFLOW enables early diagnostics of any server room or data center facility. Detecting problems arising from under or over cooling, hot air re-circulation in IT rack space and air delivery resulting in high or low air pressure in raised floors and dropped ceiling plenums.

Read the full article

Diagnosing server room temperature problems

Diagnose temperature differentials, pressure differentials and more...

AVTECH Room Alert 12E - Sensor Monitoring

Monitor temperature, humidity, power, room access and more...

AKCP SP2+ Temperature Monitoring

SP2+ monitors and logs temperature, humidity and more. SNMPv3 compliant, encrypted email and more...

Smart Cooling for Data Centers

Keeping temperatures in ASHRAE safe thermal envelopes.

AKCP SP2+ Temperature Sensor for Server Rooms

Front and rear thermal mapping for any server cabinet.

NTI Enviromux Micro-T SNMP Temperature Sensor

Monitor and manage server room environmental and security conditions over an IP network.

CTSI Limited - Complete Technology Systems Integration

At CTSI we've worked with some of the largest companies in the world, bringing our expertise to bear on many complex server room monitoring projects. Feel free to contact us today at sales@ctsilimited.com and make your project a success.