AKCP IO-Digital8 sensor with 8 ALARM/NORMAL indication in the AKCess Pro securityProbe 5E web interface. Can have 8 dry contacts on one Intelligent Sensor port. The main housing can be mounted on a wall and a standard CAT5 cable can be run to the intelligent sensor port on the securityProbe 5E.
There are two versions of the IO-digital8 depending on your requirements.
The first version has a single RJ45 connector at one end and 8 x 2 pin dry contact connectors along one side.
The second unit also has a single RJ45 connector at one end but the 8 x 2 pin dry contact connectors are replaced by two RJ45 connectors, each compatible with 4 dry contacts.
The dry contacts can be configured as inputs or outputs and the IO-digital8 is user definable so can be used to detect many different inputs such as UPS status, security systems, alarm panels or air conditioning status.
- SNMP interface for alarm/normal status.
- SNMP traps sent when critical.
- SNMP polling via get command.
- When an alarm condition is activated the description and location of the fault can be sent via email, SMS, MMS, Skype, phone calls and other advanced notifications from the securityProbe 5E's web interface.
- Each of the 8 dry contacts on the IO-digital8 sensor can also be configured as outputs either 0VDC or 5VDC and can sink up to 20mA of current when connected to a load.
|Measurement range :||Alarm or Normal|
|Communications cable :||RJ45 jack to sensor using UTP Cat 5 wire, Maximum extension cable length 305m (1000 ft.) with approved low capacitance shielded cable or UTP|
|Sensor type :||Open/closed or cycles contact switches|
|Input voltage range :||0 to 5 volts on each of the 8 dry contacts|
|Current Range :||Can sink up to 20 mAmps on each of the 8 dry contacts|
|Measurement rate :||Multiple readings every second|
|Power source :||Powered by the securityProbe 5E. No additional power needed|
|Normal input voltage is settable under software on each of the 8 dry contacts|
|Normally open, normally closed is settable under software on each of the 8 dry contacts|
|Only compatible on AKCess Pro securityProbe line of units|
|securityProbe 5E autodetects the presence of each dry contact on the IO-digital8|
|Connect up to 8 IO-digital8 sensors per each securityProbe 5E main unit and E-sensor8 expansion modules for a total of 64 dry contacts per box|
|Full autosense including disconnect alarm|
AKCP IO-Digital8 (8 x 2 Pin Connectors)
- Brand: AKCP - sensorProbe2, securityProbe series
- Product Code: AKCP IODC8
- Availability: In Stock Ships in 1-2 days
Are you a VAR / Distributor?
Up to 15% Commission.
No MOQs. No Signup Fees.
Portable Server Room Diagnostic Sensor Toolkit
Despite advances in CFD software and pre-deployment simulations of data center environments. The majority of server rooms, remote sites and data centers are not designed to handle ever increasing loads and the heat generated by that increased activity.
WIRELESS WORKFLOW enables early diagnostics of any server room or data center facility. Detecting problems arising from under or over cooling, hot air re-circulation in IT rack space and air delivery resulting in high or low air pressure in raised floors and dropped ceiling plenums.Read the full article
Diagnosing server room temperature problems
Diagnose temperature differentials, pressure differentials and more...
AVTECH Room Alert 12E - Sensor Monitoring
Monitor temperature, humidity, power, room access and more...
AKCP SP2+ Temperature Monitoring
SP2+ monitors and logs temperature, humidity and more. SNMPv3 compliant, encrypted email and more...
Smart Cooling for Data Centers
Keeping temperatures in ASHRAE safe thermal envelopes.
AKCP SP2+ Temperature Sensor for Server Rooms
Front and rear thermal mapping for any server cabinet.
Monitor and manage server room environmental and security conditions over an IP network.