• AKCP Isolated DC Voltage Sensor Includes 5 ft Cable

The Isolated Digital Voltmeter allows the user to integrate a custom sensor to the sensorProbe or securityProbe while still retaining all of the features of the standard sensors. The Digital Voltmeter has the full range of functionality including SNMP integration, email and trap generation upon settable limits and thresholds.

Customers have added pressure transducers, solar power monitors, battery monitors, have integrated the sensorProbe and securityProbe into laboratory test equipment, and many other uses.

The Isolated Digital Voltmeter can be used by OEMs and engineers to create their own custom data collection systems. The user can input a DC voltage range from -60 to 0 volts or 0 to 60 volts. The Digital Voltmeter sensors can provide real time data from the world around them.

The sensor now includes an isolated ground for better safety and protection against over voltages and shorts. Readings are available in both an absolute value and a percentage of full scale. Full scale is user programmable with both the base and top voltage from -60 to 0 or 0 to 60 volts.
The web interface for the Isolated Digital Voltmeter has been redesigned to simplify the settings when used with the external sensor. The unit of a measured entity can be customized to any text, e.g. Lbs for measuring the pressure. All numbers are now in a decimal point format; hence, it is possible to enter 12.8 Volts or 75.7 Lbs in threshold settings, for example.

  • SNMP interface for alarm/normal status.
  • SNMP traps sent when status changes.
  • SNMP polling via get available.
  • Web browser interface available.
  • When an alarm condition is activated the description and location of the fault can be sent via email.

Features

Isolation feature allows for the measurement at any point in a system with the possibility of sorting out problems such as the measurement of battery voltages in a string of batteries.

  • Integrate third party sensors into the sensorProbe or securityProbe base units such as pressure transducers, solar power monitors, battery monitors and laboratory test equipment.
  • Easy setup and installation.
  • Create custom data collection systems.
  • Powered by the securityProbe, no additional power required.
  • The unit of a measured entity can be customized to any text, e.g. Lbs for measuring the pressure.
  • Send SNMP traps and or email alerts from the sensorProbe units based upon set thresholds.
  • Send advanced alerts from the securityProbe or AKCess Pro Server based upon set thresholds.

Specifications

Isolation Voltage : 1600 VDC.
2 hardware setting modes: Wide Range Mode is -60 to +60 VDC with 0.01 V resolution and 1% accuracy.
High Resolution Mode is -5 to +5 VDC with 0.001 V resolution and 1% accuracy.
Communications Cable : RJ-45 jack to sensor using UTP CAT5/6 cable.
Input Impedance : 1.6 MOhm when set at the high scale ( 60 Volt maximum ) and 1.1 MOhm when set at the low scale (5 volt maximum).
Maximum Extension Cable : run length is 60 feet with approved low capacitance shielded cable or UTP.
Measurement Rate : Multiple readings every second.
Power Source : Powered by the sensorProbe or securityProbe. No additional power is needed. Up to 2 Digital Voltmeter sensors per sensorProbe2, up to 8 per sensorProbe8 and up to 8 per securityProbe and up to 600 per securityProbe 5E (8 per E-sensor8 expansion board).

Write a review

Please login or register to review

AKCP Isolated DC Voltage Sensor Includes 5 ft Cable

  • $125.00



Are you a VAR / Distributor?
Up to 15% Commission.
No MOQs. No Signup Fees.

Tags: akcp, isolated, dc, voltage, sensor, includes, 5, ft, cable



Featured Article

Portable Server Room Diagnostic Sensor Toolkit

Despite advances in CFD software and pre-deployment simulations of data center environments. The majority of server rooms, remote sites and data centers are not designed to handle ever increasing loads and the heat generated by that increased activity.

WIRELESS WORKFLOW enables early diagnostics of any server room or data center facility. Detecting problems arising from under or over cooling, hot air re-circulation in IT rack space and air delivery resulting in high or low air pressure in raised floors and dropped ceiling plenums.

Read the full article

Diagnosing server room temperature problems

Diagnose temperature differentials, pressure differentials and more...


AVTECH Room Alert 12E - Sensor Monitoring

Monitor temperature, humidity, power, room access and more...


AKCP SP2+ Temperature Monitoring

SP2+ monitors and logs temperature, humidity and more. SNMPv3 compliant, encrypted email and more...

Smart Cooling for Data Centers

Keeping temperatures in ASHRAE safe thermal envelopes.


AKCP SP2+ Temperature Sensor for Server Rooms

Front and rear thermal mapping for any server cabinet.


NTI Enviromux Micro-T SNMP Temperature Sensor

Monitor and manage server room environmental and security conditions over an IP network.


CTSI Limited - Complete Technology Systems Integration

At CTSI we've worked with some of the largest companies in the world, bringing our expertise to bear on many complex server room monitoring projects. Feel free to contact us today at sales@ctsilimited.com and make your project a success.