• AKCP SECIO Digital 128 Port IO Expansion Board

AKCP’s popular expansion units are now available in 64, 128, and 192 dry contact versions making expansion easier than ever. The SECIO offers an efficient and cost effective expansion solution with the lowest cost per dry contact on the market today.

Collect information and gain valuable insight by using the expansion units to provide your system with greater monitoring capacity. AKCP provides you with the versatility you need to satisfy a wide range of requirements. The SEC IO offers an efficient and cost effective expansion solution with the lowest cost per dry contact on the market today.

The SEC IO is an advanced intelligent monitoring device that features plug and play technology. Simply open the box and install the expansion unit into your existing system and it is instantly ready to use.

Once installed, users can plug dry contact sensors into the SEC IO expansion unit.

Dry contacts can be configured as inputs or outputs and SEC IO units are user definable so they can be used to detect many different inputs including UPS status, security systems, alarm panels, or air conditioning status.

AKCP provides you with the versatility you need to satisfy a wide range of requirements.

Typical Applications

  • SNMP interface for alarm/normal status.
  • SNMP traps sent when critical.
  • SNMP polling via get command.
  • When an alarm condition is activated the description and location of the fault can be sent via email, SMS, MMS, Skype, phone calls and other advanced notifications from the securityProbe web interface.
  • Each of the 64/128/192 dry contacts on the SECIO can be configured as outputs either 0VDC or 5VDC and can sink up to 20mA of current when connected to a load.

Specifications

Dimensions & Weight

  • SECIO64
  • 433mm (L) x 202mm (W) x 44.5 (H)
  • Weight : 1750g
  • SECIO128
  • 433mm (L) x 202mm (W) x 44.5 (H)
  • Weight : 1872g
  • SECIO192
  • 433mm (L) x 202mm (W) x 66 (H)
  • Weight : 2243g

Status Indication

  • LED indication for Power
  • LED for E-Module connectivity

Mounting 

  • Rack mount brackets included
  • Compatible with AKCess Pro DIN and tray rack mount kits

Power Requirements

  • Voltage 7.0 – 9 VDC, 3Amp

Operating Environment

  • Temperature : Min. -35° C Max. +55° C
  • Humidity : Min. 20% - Max. 80% (Non-Condensing) 

Output 

  • 4 Configurable output signals (0VDC/5VDC) on any of the 
    16/32/48 RJ-45 sensor ports
  • 1 RJ-45 expansion module output (E-out)

Inputs

  • 16 / 32 / 48 RJ-45 ports for connecting 4 Dry Contacts each (up to 5VDC)
  • 1x RJ-45 expansion module input (Expansion In)

MTBF

  • 400,000 Hours

Components

  • Manufactured using highly integrated,low power surface mount technology to ensure long term reliability.

Power Consumption

  • TBC

E-Modules

  • Uses standard RJ-45 connections and CAT5 LAN cable
  • Data transfer rate: 115.2 KBPS
  • Maximum extension cable run length: 300 meters (1000 feet)
  • 1 RJ-45 expansion module input (E-in)
  • 1 RJ-45 expansion module output (E-out)

 

 

Dry Contact Specifications
Measurement Range : Alarm or Normal
Sensor Type : Open / Closed or cycles contact switch
Input Voltage Range : 0 to 5 volts on each of the dry contacts
Current Range : Can sink up to 20mAmps on each of the 64/128/192 dry contacts
Measurement Range : Mutliple readings every second
Power Source :

Normal input voltage is settable under software on each of the 64/128/192 dry contacts.

Normally open, normally closed is settable under software on each of the 64/128/192 dry contacts.

Only compatible with securityProbe base units.

Write a review

Please login or register to review

AKCP SECIO Digital 128 Port IO Expansion Board

  • $1,810.00



Are you a VAR / Distributor?
Up to 15% Commission.
No MOQs. No Signup Fees.

Tags: akcp, secio, digital, 128, port, io, expansion, board



Featured Article

Portable Server Room Diagnostic Sensor Toolkit

Despite advances in CFD software and pre-deployment simulations of data center environments. The majority of server rooms, remote sites and data centers are not designed to handle ever increasing loads and the heat generated by that increased activity.

WIRELESS WORKFLOW enables early diagnostics of any server room or data center facility. Detecting problems arising from under or over cooling, hot air re-circulation in IT rack space and air delivery resulting in high or low air pressure in raised floors and dropped ceiling plenums.

Read the full article

Diagnosing server room temperature problems

Diagnose temperature differentials, pressure differentials and more...


AVTECH Room Alert 12E - Sensor Monitoring

Monitor temperature, humidity, power, room access and more...


AKCP SP2+ Temperature Monitoring

SP2+ monitors and logs temperature, humidity and more. SNMPv3 compliant, encrypted email and more...

Smart Cooling for Data Centers

Keeping temperatures in ASHRAE safe thermal envelopes.


AKCP SP2+ Temperature Sensor for Server Rooms

Front and rear thermal mapping for any server cabinet.


NTI Enviromux Micro-T SNMP Temperature Sensor

Monitor and manage server room environmental and security conditions over an IP network.


CTSI Limited - Complete Technology Systems Integration

At CTSI we've worked with some of the largest companies in the world, bringing our expertise to bear on many complex server room monitoring projects. Feel free to contact us today at sales@ctsilimited.com and make your project a success.