• AKCP securityProbe 5E Standard

Monitor the physical environment and receive alerts of any disturbances, such as unauthorized intruders, security breaches, high temperatures, smoke, water leakages, power outages and more.

Compatible with all of the AKCess Pro range of Intelligent Sensors it provides a complete environmental, access control and security monitoring solution for up to 500 connected sensors.

The securityProbe 5E Standard has a Linux Operating System running an iMX25 CPU. An additional 2 Gigabytes SD card can be installed to provide greater storage capacity.

Networked Monitoring
It is TCP / IP compliant and runs lighttpd web server including https (SSL), Bash, Perl, Telnet, PHP, Email and Nagios.

The securityProbe 5E Standard has an easy-to-use web-based user interface for sensor configuration, data collection and extensive graphing. Complete SNMP functions such including SNMP v3 encryption are supported.

The securityProbe 5E Standard also supports Modbus Master / Slave, Modbus RTU and Modbus over TCP / IP creating a unique, easy to configure Modbus to SNMP gateway.

The web-based interface is written in PHP allowing end-user changes such as language translation. The securityProbe 5E Standard has a battery backed time of day clock for accurate record keeping.


  • Receive notifications of anomalous events via email, SMS / MMS, SNMP traps, and many more.
  • Integrates with network management systems via SNMPv1 and Encrypted SNMPv3.
  • Stream video and sensor information directly to your cellphone or PDA.
  • Ability to connect external GPRS / GSM modem, Bluetooth and WiFi USB adapters.
  • Uses Linux operating system for maximum stability and flexibility.
  • Virtual Sensors monitor power, Modbus, network devices, and other SNMP based equipment.
  • Built-in graphing and data logging, internally or to a remote PC.
  • Platform independent; free firmware upgrades and utilities from AKCess Pro.
  • Monitor up to 500 intelligent sensors using expansion modules ( E-Opto 16 and E-Sensor 8 )
  • Compatible with complete range of AKCess Pro Intelligent Sensors
  • Full Modbus support : Modbus Master / Slave, Modbus RTU, Modbus over TCP / IP



  • Size 8.5" x 5.43" x 1.80"
  • 1U Rack Mount Standard
  • Weight 1 Kg

Expansion Ports

  • 2x RJ-45 Expansion Ports
  • 115.2K BPS Data Transfer Rate
  • Simultaneous functionality
    between Expansion Ports &
    RS485 port threshold status


  • Rack mount brackets included
  • Compatible with AKCess Pro’s DIN and rack mount trays

Power Requirements

  • Voltage 7.0 – 9 VDC, 3Amp

Status Indication

  • LED indication for Power
  • LED for Network Connectivity
  • LED for sensor online and
    threshold status


  • Ext. Speaker Out, 2.5” jack (Analog)
  • Mic Out, 2.5" jack (Analog) (For modem application)


  • 8x RJ-45 Sensor Ports
  • 4x RJ-45 Expansion Ports 
  • 1x USB 2.0 Modem Port
  • Audio In (Analog) 2.5" jack 
  • RS485, 2 Pin Terminal box, (used for Modbus)

Operating Environment

  • Temp : Min. -35° C - Max. +55° C
  • Humidity : Min. 20% - Max. 80% (Non-Condensing)


  • Manufactured using highly integrated, low power surface mount technology to ensure long term reliability. 
  • CPU: AKCP i.MX25 Processor
  • 128 MB On-Board NAND Flash
  • HC SD Memory Slot on-board (up to 16GB

Power Consumption

  • Typical 5.025 Watt, 0.67A


  • 400,000 Hours

Expansion Boards

  • 8 Port Intelligent Sensors Module 
    (E-Sensor8) 16 Port Dry Contacts Module (E-opto16) (Maximum of 500 Sensors)
  • Two Door, Door Control Unit (DCU) Extendable up to 1,000 Feet or 300 meters
  • Expansion modules are daisy chainable

Write a review

Please login or register to review

AKCP securityProbe 5E Standard

  • $1,000.00

Are you a VAR / Distributor?
Up to 15% Commission.
No MOQs. No Signup Fees.

Tags: akcp, securityprobe, 5e, standard

Featured Article

Portable Server Room Diagnostic Sensor Toolkit

Despite advances in CFD software and pre-deployment simulations of data center environments. The majority of server rooms, remote sites and data centers are not designed to handle ever increasing loads and the heat generated by that increased activity.

WIRELESS WORKFLOW enables early diagnostics of any server room or data center facility. Detecting problems arising from under or over cooling, hot air re-circulation in IT rack space and air delivery resulting in high or low air pressure in raised floors and dropped ceiling plenums.

Read the full article

Diagnosing server room temperature problems

Diagnose temperature differentials, pressure differentials and more...

AVTECH Room Alert 12E - Sensor Monitoring

Monitor temperature, humidity, power, room access and more...

AKCP SP2+ Temperature Monitoring

SP2+ monitors and logs temperature, humidity and more. SNMPv3 compliant, encrypted email and more...

Smart Cooling for Data Centers

Keeping temperatures in ASHRAE safe thermal envelopes.

AKCP SP2+ Temperature Sensor for Server Rooms

Front and rear thermal mapping for any server cabinet.

NTI Enviromux Micro-T SNMP Temperature Sensor

Monitor and manage server room environmental and security conditions over an IP network.

CTSI Limited - Complete Technology Systems Integration

At CTSI we've worked with some of the largest companies in the world, bringing our expertise to bear on many complex server room monitoring projects. Feel free to contact us today at sales@ctsilimited.com and make your project a success.