• AKCP spotWater Sensor 60 ft

Protect your electronic equipment from water damage!

The spotWater detector is an advanced microprocessor based design capable of detecting distilled water. Standard water detectors are unable to detect distilled water and water with other impurities due to them using a resistance type circuit. These resistance types rely on electrolytes present in the water, therefore being unable to detect distilled water due to it's high resistance.

  • Detect presence of water
  • Works with securityProbe and sensorProbe series base units
  • Powered by the base unit, no additional power necessary
  • Maximum cable extension of 150m (500ft)
  • Even detects the presence of distilled water
  • The entire circuit is encased in epoxy giving it a waterproof finish and able to withstand being submerged in water for prolonged periods. It has an SNMP OID for monitoring across a network, and will therefore report it's critical condition at anytime before returning to it's normal state.

Notifications can be sent to you via SNMP traps, or E-mail (sensorProbe base units) or using any of the wide range of alerts available on the securityProbe series.


Measurement Range Wet or Dry ( -20°C +60°C)
Measurement Accuracy Able to measure distilled water
Sensor Type Patent pending, microprocessor controlled, capacitance measurement technology
Power source Powered by the sensorProbe. No additional power needed
Communications Cable RJ-45 jack to sensor using UTP Cat 5 wire, Maximum extension cable length 150m (500 ft.) with approved low capacitance shielded cable or UTP
Measurement Rate Multiple readings every second
  sensorProbe auto detects the presence of the water sensor
  Up to 2 spotWater detectors per sensorProbe2, 8 per sensorProbe8 and securityProbe
  Full autosense including disconnect alarm
Note AKCP does not recommend the spotWater Sensor to be placed on a conductive surface. If this is required, add the Insulation Coating P/N : WSIC to each spotWater Sensor ordered.

Write a review

Please login or register to review

AKCP spotWater Sensor 60 ft

  • $190.00

Are you a VAR / Distributor?
Up to 15% Commission.
No MOQs. No Signup Fees.

Tags: akcp, spotwater, sensor, 60, ft

Featured Article

Portable Server Room Diagnostic Sensor Toolkit

Despite advances in CFD software and pre-deployment simulations of data center environments. The majority of server rooms, remote sites and data centers are not designed to handle ever increasing loads and the heat generated by that increased activity.

WIRELESS WORKFLOW enables early diagnostics of any server room or data center facility. Detecting problems arising from under or over cooling, hot air re-circulation in IT rack space and air delivery resulting in high or low air pressure in raised floors and dropped ceiling plenums.

Read the full article

Diagnosing server room temperature problems

Diagnose temperature differentials, pressure differentials and more...

AVTECH Room Alert 12E - Sensor Monitoring

Monitor temperature, humidity, power, room access and more...

AKCP SP2+ Temperature Monitoring

SP2+ monitors and logs temperature, humidity and more. SNMPv3 compliant, encrypted email and more...

Smart Cooling for Data Centers

Keeping temperatures in ASHRAE safe thermal envelopes.

AKCP SP2+ Temperature Sensor for Server Rooms

Front and rear thermal mapping for any server cabinet.

NTI Enviromux Micro-T SNMP Temperature Sensor

Monitor and manage server room environmental and security conditions over an IP network.

CTSI Limited - Complete Technology Systems Integration

At CTSI we've worked with some of the largest companies in the world, bringing our expertise to bear on many complex server room monitoring projects. Feel free to contact us today at sales@ctsilimited.com and make your project a success.