• AKCP Temperature & Humidity Sensor Includes 5 ft Cable

Dual sensor, 2 sensors on one port!

In situations where both temperature and humidity can be critical you can keep up to speed on the current conditions using this sensor. Combining temperature and humidity into the one sensor frees up an additional intelligent sensor port on your base unit.

  • Monitors temperature and humidity on a single intelligent sensor port
  • Own SNMP OID for data collection via a network
  • Temperature measurement from -40ºC - +75ºC
  • Relative Humidity measurement from 0% - 100%
  • Powered by base unit, no additional power needed
  • THS-AdjustableSetup is simple with the sensorProbe and securityProbe autosense function. Once plugged into the intelligent sensor port the base unit automatically detects the sensors presence and configures it for you.

All you need to do is set your thresholds for low and high warning and critical parameters. The built in graphing function of the base unit gives you a pattern of temperature or humidity trends over time.

Certification

Our Single Port Temperature/Humidity Sensor is calibrated using dedicated equipment which is calibrated according to ISO/IEC 17025 and calibrated by comparison against natural standards, natural physical constants, consensus standards, or by ratio type measurements using self-calibrating techniques.

Standards incorporated to establish this comparison are NIST and NPL traceable.
Our Single Port Temperature/Humidity Sensor comply with RoHS and WEEE requirements. There is no substance to be declared.

Specifications

Temperature

Measurement Range Celsius : -40°C to +75°C
Measurement Resolution Celsius : 1°C
Measurement Accuracy Celsius : Maximum ±2.3 at -40ºC, minimum ±0.4 at +25ºC and ±1.7 at +75ºC
Measurement Range Fahrenheit : -40°F to +167°F
Measurement Resolution Fahrenheit : 1°F increments
Measurement Accuracy Fahrenheit : Maximum ±4.1 at -40ºF, minimum ±0.9 at +25ºC and ±4 at +167ºF

Humidity

Measurement range : 0 to 100% Relative humidity
Resolution : 1%
Accuracy at : 25°C ±3%
Communications cable : UTP Cat 5 cable
Power source : Powered by the sensorProbe. No additional power needed
Power Consumption : Typical 7.25 mWatt, 1.45mA
  Sensor element wettable without damage
  sensorProbe auto detects the presence of the dual sensor
  Up to 2 dual sensors per sensorProbe2, 8 per sensorProbe8 and securityProbe
Important Note: The fixed one foot type or TMP01 and THS01 are not designed to be extended. If you need to extend these sensors then you need to use the TMP00 or THS00 (remote type).

We also do not recommend you trying to connect any of our AKCP sensors including the temperature and dual temp humidity sensors though patch panels or using the RJ-45 couplers to extend them. Please see the temperature sensors product manual or FAQ in our knowledge base for more details regarding this.

Write a review

Please login or register to review

AKCP Temperature & Humidity Sensor Includes 5 ft Cable

  • $120.00



Are you a VAR / Distributor?
Up to 15% Commission.
No MOQs. No Signup Fees.

Tags: akcp, temperature, humidity, sensor, includes, 5, ft, cable



Featured Article

Portable Server Room Diagnostic Sensor Toolkit

Despite advances in CFD software and pre-deployment simulations of data center environments. The majority of server rooms, remote sites and data centers are not designed to handle ever increasing loads and the heat generated by that increased activity.

WIRELESS WORKFLOW enables early diagnostics of any server room or data center facility. Detecting problems arising from under or over cooling, hot air re-circulation in IT rack space and air delivery resulting in high or low air pressure in raised floors and dropped ceiling plenums.

Read the full article

Diagnosing server room temperature problems

Diagnose temperature differentials, pressure differentials and more...


AVTECH Room Alert 12E - Sensor Monitoring

Monitor temperature, humidity, power, room access and more...


AKCP SP2+ Temperature Monitoring

SP2+ monitors and logs temperature, humidity and more. SNMPv3 compliant, encrypted email and more...

Smart Cooling for Data Centers

Keeping temperatures in ASHRAE safe thermal envelopes.


AKCP SP2+ Temperature Sensor for Server Rooms

Front and rear thermal mapping for any server cabinet.


NTI Enviromux Micro-T SNMP Temperature Sensor

Monitor and manage server room environmental and security conditions over an IP network.


CTSI Limited - Complete Technology Systems Integration

At CTSI we've worked with some of the largest companies in the world, bringing our expertise to bear on many complex server room monitoring projects. Feel free to contact us today at sales@ctsilimited.com and make your project a success.