If your business infrastructure relies on backup generators, the chances are you are also relying on fuel to power those. By using the AKCess Pro Ultrasonic Fuel Level sensor you can ensure that your fuel tanks are filled and ready for the most critical moments.
The AKCess Pro Ultrasonic Fuel Level Sensor is a liquid level detector that will monitor the level of liquid in a tank and display this level on the securityProbe 5E's web interface and send alerts accordingly.
The RJ-45 intelligent sensor port on base unit powers the sensor. It is compatible with any of the securityProbe series units, or the E-sensor 8 expansion modules.
You can instantly be alerted should there be any drop below critical levels in your liquid. Advance alerting, including an additional feature that alerts you if you liquid level is dropping too quickly, protects you from possible fuel leaks or theft and ensure your tanks never run dry again.
The sensor assembly incorporates an advanced tank sender based on the ultrasonic measurement technology and can monitor a variety of liquids in many types of tanks. These tank level thresholds can then be linked to the advanced notification alerts on the securityProbe 5E's web interface.
This sensor is designed for monitoring liquid levels in tanks. These tanks can be in linear and non-linear sizes as they are easily calibrated from a simple wizard that is run from the securityProbe 5E's web interface. Linearization parameters are used to adjust the measurement accuracy for non-linear tanks. For example a tank is non-linear if the tank height is not proportional to its capacity.
The low profile design and standard SAE 5 hole mounting pattern make it easy to install and setup and it has no moving parts for long lasting functionality.
- Ideal for remote sites that depend on backup generator power
- Normal, Low and Critical alerting
- Easy setup and installation
- Can monitor several liquids
- Monitor your tanks for critically low levels of liquid
- Requires 12V external power supply (included)
- Extremely low profile only 20mm high once mounted
- Operating distance of 0mm to 2000mm maximum
- Programmable tank dimensions via windows application
- Linear and non linear tank calibration at 5 levels
- Supports metal and plastic tanks
- Supports tanks wall thickness up to 6mm (or larger if spacer is used and top limit adjusted)
- Industry standard SAE-5 stud mounting pattern with gasket seal and washers.
|General :||All size tanks with depth up to 2 meters|
|Accurate measurement for non-linear size tank|
|Standard SAE 5 mounting hole and easy fit|
|Is set for 0-2000 mm depth off the shelf (not suitable for tank depths less than 200 mm)|
|Measurement method :||Acoustic sonic measurement|
|Tank depth :||0 - 2000 mm (6.5 ft)|
|Accuracy Distance :||0 - 2000 mm (6.5 ft) at 2 mm accuracy|
|Full-Scale Accuracy :|
|Mounting :||SAE 5 stud mounting pattern with gasket, seal and screws (top mount only).|
|Tank type style :||Metal and plastic with non linear capacity|
|Requires Security Probe 5E or E-sensor 8 expansion module|
|Communications cable :||RJ-45 jack to base unit using UTP CAT5 cable.|
|Communications cable Max. length: 100ft (30 meters)|
|Comes fully assembled, only needs calibration and installation.|
|Leader cable from the tank sender to the converter box is 18 inches|
|Ships with a 15 foot CAT6 LAN extension cable|
|CAT6 LAN extension cable can be extended up to 100 feet.|
|Environmental :||Chemical resistance: Certain types of fuel, water, toilet chemicals. It is advised that the UFLS is not to be used with explosive chemicals of any kind.|
|Operating temperature range of 4°c to 65°c|
|Electrical :||Operates from a 12 volt external power supply (included)|
|Current draw :||25 mA with 5 V gauge output|
|Ignition protected to ISO 8846|
|Fire Resistance tested to ABYC, US Coast guard and ISO10088|
|Output types :||Analogue 10-180, 10-300, 240-33 ohm gauges and 0-5volt|
|Maximum Tank depths :||Operating distance of 0mm to 1100mm for certain Fuel tanks|
|Operating distance of 0mm to 2000mm for Water tanks|
|Operating distance of 0mm to 2000mm for Diesel tanks|
|Operating distance of 0mm to 1500mm at 55°c|
|Manufacturer Warning :||It is advised that the UFLS is not to be used with explosive chemicals of any kind.|
AKCP Ultrasonic Fuel Level Sensor
- Brand: AKCP - sensorProbe2, securityProbe series
- Product Code: AKCP UFLS
- Availability: In Stock Ships in 1-2 days
Are you a VAR / Distributor?
Up to 15% Commission.
No MOQs. No Signup Fees.
Portable Server Room Diagnostic Sensor Toolkit
Despite advances in CFD software and pre-deployment simulations of data center environments. The majority of server rooms, remote sites and data centers are not designed to handle ever increasing loads and the heat generated by that increased activity.
WIRELESS WORKFLOW enables early diagnostics of any server room or data center facility. Detecting problems arising from under or over cooling, hot air re-circulation in IT rack space and air delivery resulting in high or low air pressure in raised floors and dropped ceiling plenums.Read the full article
Diagnosing server room temperature problems
Diagnose temperature differentials, pressure differentials and more...
AVTECH Room Alert 12E - Sensor Monitoring
Monitor temperature, humidity, power, room access and more...
AKCP SP2+ Temperature Monitoring
SP2+ monitors and logs temperature, humidity and more. SNMPv3 compliant, encrypted email and more...
Smart Cooling for Data Centers
Keeping temperatures in ASHRAE safe thermal envelopes.
AKCP SP2+ Temperature Sensor for Server Rooms
Front and rear thermal mapping for any server cabinet.
Monitor and manage server room environmental and security conditions over an IP network.