Water resistant dual sensor for damp environments. In situations where both temperature and humidity can be critical you can keep up to speed on the current conditions using this sensor. Combining temperature and humidity into the one sensor frees up an additional intelligent sensor port on your base unit.
- Monitors temperature and humidity on a single intelligent sensor port
- Designed for use in wet/damp/outdoor environments
- Own SNMP OID for data collection via a network
- Temperature measurement from -40ºC - +75ºC
- Relative Humidity measurement from 0% - 100%
- Powered by base unit, no additional power needed
Setup is simple with the sensorProbe and securityProbe autosense function. Once plugged into the intelligent sensor port the base unit automatically detects the sensors presence and configures it for you.
All you need to do is set your thresholds for low and high warning and critical parameters. The built in graphing function of the base unit gives you a pattern of temperature or humidity trends over time.
Our Single Port Temperature/Humidity Sensor is calibrated using dedicated equipment which is calibrated according to ISO/IEC 17025 and calibrated by comparison against natural standards, natural physical constants, consensus standards, or by ratio type measurements using self-calibrating techniques.
Standards incorporated to establish this comparison are NIST and NPL traceable.
Our Single Port Temperature/Humidity Sensor comply with RoHS and WEEE requirements. There is no substance to be declared.
|Measurement Range Celsius||-40°C to +75°|
|Measurement Resolution Celsius||1°C|
|Measurement Accuracy Celsius||Maximum ±2.3 at -40ºC, minimum ±0.4 at +25ºC and ±1.7 at +75ºC|
|Measurement Range Fahrenheit||-40°F to +167°F|
|Measurement Resolution Fahrenheit||1°F increments|
|Measurement Accuracy Fahrenheit||Maximum ±4.1 at -40ºF, minimum ±0.9 at +25ºC and ±4 at +167ºF|
|Measurement range||0 to 100% Relative humidity|
|Accuracy at||25°C ±3%|
|Communications cable||UTP Cat 5 cable|
|Power source||Powered by the sensorProbe. No additional power needed|
|Power Consumption||Typical 7.25 mWatt, 1.45mA|
|Sensor element wettable without damage|
|sensorProbe auto detects the presence of the dual sensor|
|Up to 2 dual sensors per sensorProbe2, 8 per sensorProbe8 and securityProbe|
AKCP Water Resistant Single Port Temperature and Humidity Sensor Includes fixed 15 ft Cable
- Brand: AKCP - sensorProbe2, securityProbe series
- Product Code: AKCP THSW15
- Availability: In Stock Ships in 1-2 days
Are you a VAR / Distributor?
Up to 15% Commission.
No MOQs. No Signup Fees.
Portable Server Room Diagnostic Sensor Toolkit
Despite advances in CFD software and pre-deployment simulations of data center environments. The majority of server rooms, remote sites and data centers are not designed to handle ever increasing loads and the heat generated by that increased activity.
WIRELESS WORKFLOW enables early diagnostics of any server room or data center facility. Detecting problems arising from under or over cooling, hot air re-circulation in IT rack space and air delivery resulting in high or low air pressure in raised floors and dropped ceiling plenums.Read the full article
Diagnosing server room temperature problems
Diagnose temperature differentials, pressure differentials and more...
AVTECH Room Alert 12E - Sensor Monitoring
Monitor temperature, humidity, power, room access and more...
AKCP SP2+ Temperature Monitoring
SP2+ monitors and logs temperature, humidity and more. SNMPv3 compliant, encrypted email and more...
Smart Cooling for Data Centers
Keeping temperatures in ASHRAE safe thermal envelopes.
AKCP SP2+ Temperature Sensor for Server Rooms
Front and rear thermal mapping for any server cabinet.
Monitor and manage server room environmental and security conditions over an IP network.