• APC BE700G-UK Power-Saving Back-UPS ES 8 Outlet

Backup power that allows you to work through short-medium power outages & safeguards equipment from damaging surges/spikes

Features

Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Battery-protected and surge-only outlets
Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment

Cold-start capable
Provides temporary battery power when the utility power is out.

Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

Dataline Surge Protection
Provides protection of connected equipment from power surges on the data lines.

Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Adjustable voltage sensitivity
Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.

Audible alarms
Provides notification of changing utility power and UPS power conditions

User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing

Mean Time to Repair (MTTR)
USB connectivity Provides management of the UPS via a USB port (not available on all models).

Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Battery replacement without tools
Enables fast battery replacement, lowering Mean Time to Repair (MTTR).

Protection

Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.

Surge only outlets
Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.

Availability

Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.

Serviceability

Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse.

Manageability

Audible alarms
Provides notification of changing utility power and UPS power conditions

LED status display
Quickly understand unit and power status with visual indicators.

Safety

Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Specification

Output 
Output Power Capacity 405 Watts / 700 VA
Max Configurable Power 405 Watts / 0 VA
Nominal Output Voltage 230V
Output Frequency (sync to mains) 47 - 63 Hz
Other Output Voltages 220
Topology Standby
Waveform Type Stepped approximation to a sinewave
Output Connections (4) BS 1363 (Battery Backup)
(4) BS 1363 (Surge Protection)
Output Voltage Tolerance +/- 5% static and 100% load step
Input 
Nominal Input Voltage 230V
Input Frequency 50/60 Hz +/- 5 Hz (auto sensing)
Input Connections British BS1363A
Cord Length 1.83 meters
Input voltage range for main operations 180 - 266V
Maximum Input Current 10A
Input Breaker Capacity 10.0A
Batteries & Runtime 
Battery Type Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Typical recharge time 16 hour(s)
Replacement Battery RBC17
Communications & Management 
Interface Port(s) USB
Control panel LED status display with On Line : On Battery : Replace Battery and Overload indicators
Surge Protection and Filtering 
Surge energy rating 310 Joules
Filtering Full time multi-pole noise filtering : 5% IEEE surge let-through : zero clamping response time : meets UL 1449
Data Line Protection Analog phone line for phone/fax/modem/DSL (RJ-45 connector), Network line - 10/100 Base-T Ethernet (RJ-45 connector)
Physical 
Maximum Height  89.00 mm 
Maximum Width  224.00 mm 
Maximum Depth  311.00 mm 
Net Weight  6.93 KG 
Shipping Weight  7.84 KG 
Shipping Height  127.00 mm 
Shipping Width  279.00 mm 
Shipping Depth  400.00 mm 
Master Carton Dimensions (Length x Width x Height)  324.00 mm 
Master Carton Weight  16.36 KG 
Color Black 
SCC Codes  1073130426834 2 
Units per Pallet  48.00 
# of Layers per Pallet  
# of Units per Layer per Pallet  20 
Pallet Weight 636.36 KG
Environmental 
Operating Environment  0 - 40 °C 
Operating Relative Humidity  0 - 95% 
Operating Elevation  0-9000 meters 
Storage Temperature  -15 - 40 °C 
Storage Relative Humidity  0 - 95% 
Storage Elevation  0-9000 meters 
Audible noise at 1 meter from surface of unit  40.00 dBA 
Conformance  
Regulatory Approvals  CE 
Standard Warranty  2 years repair or replace, 3 years repair or replace for European Union countries 
Equipment protection policy  Lifetime : 50000 GBP 
Sustainable Offer Status 
RoHS  Compliant 
REACH REACH: Contains No SVHCs

Includes: CD with software, Telephone Cable, User Manual

 


*Box quantity refers to the number of units contained in this product's outer packaging. It does not refer to the number of products purchased for the quoted unit price unless otherwise stated.

Write a review

Please login or register to review

APC BE700G-UK Power-Saving Back-UPS ES 8 Outlet

  • Brand: APC
  • Product Code: APC BE700G-UK Power-Savin
  • Availability: In Stock Ships in 1-2 days
  • $120.00



Are you a VAR / Distributor?
Up to 15% Commission.
No MOQs. No Signup Fees.

Tags: apc, be700g, uk, power, saving, back, ups, es, 8, outlet



Featured Article

Portable Server Room Diagnostic Sensor Toolkit

Despite advances in CFD software and pre-deployment simulations of data center environments. The majority of server rooms, remote sites and data centers are not designed to handle ever increasing loads and the heat generated by that increased activity.

WIRELESS WORKFLOW enables early diagnostics of any server room or data center facility. Detecting problems arising from under or over cooling, hot air re-circulation in IT rack space and air delivery resulting in high or low air pressure in raised floors and dropped ceiling plenums.

Read the full article

Diagnosing server room temperature problems

Diagnose temperature differentials, pressure differentials and more...


AVTECH Room Alert 12E - Sensor Monitoring

Monitor temperature, humidity, power, room access and more...


AKCP SP2+ Temperature Monitoring

SP2+ monitors and logs temperature, humidity and more. SNMPv3 compliant, encrypted email and more...

Smart Cooling for Data Centers

Keeping temperatures in ASHRAE safe thermal envelopes.


AKCP SP2+ Temperature Sensor for Server Rooms

Front and rear thermal mapping for any server cabinet.


NTI Enviromux Micro-T SNMP Temperature Sensor

Monitor and manage server room environmental and security conditions over an IP network.


CTSI Limited - Complete Technology Systems Integration

At CTSI we've worked with some of the largest companies in the world, bringing our expertise to bear on many complex server room monitoring projects. Feel free to contact us today at sales@ctsilimited.com and make your project a success.