APC BK500EI Back-UPS, 300 Watts / 500 VA, Input 230V / Output 230V , Interface Port USB
Provides management of the UPS via a USB port (not available on all models).
Provides management of the UPS via a serial port.
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.
Surge only outlets
Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse.
Provides notification of changing utility power and UPS power conditions
LED status display
Quickly understand unit and power status with visual indicators.
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
|Output Power Capacity||300 Watts / 500 VA|
|Max Configurable Power||300 Watts / 500 VA|
|Nominal Output Voltage||230V|
|Output Frequency (sync to mains)||47 - 63 Hz|
|Waveform Type||Stepped approximation to a sinewave|
|Output Connections||(1) IEC 320 C13 (Surge Protection) |
(3) IEC 320 C13 (Battery Backup)
(2) IEC Jumpers (Surge Protection)
|Nominal Input Voltage||230V|
|Input Frequency||50/60 Hz +/- 3 Hz (auto sensing)|
|Input Connections||IEC-320-C14 inlet|
|Cord Length||1.83 meters|
|Input voltage range for main operations||180 - 266V|
|Input voltage adjustable range for mains operation||160 - 300V|
|Maximum Input Current||7A|
|Input Breaker Capacity||7.0 A|
|Batteries & Runtime|
|Battery Type||Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof|
|Typical recharge time||8 hour(s)|
|Communications & Management|
|Control Panel||LED status display with On Line : On Battery : Replace Battery and Overload indicators|
|Audible Alarm||Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm|
|Surge Protection and Filtering|
|Surge energy rating||310 Joules|
|Filtering||Full time multi-pole noise filtering : 5% IEEE surge let-through : zero clamping response time : meets UL 1449|
|Data Line Protection||Analog phone line for phone/fax/modem/DSL (RJ-45 connector)|
|Maximum Height||165.00 mm|
|Maximum Width||91.00 mm|
|Maximum Depth||284.00 mm|
|Net Weight||6.32 KG|
|Shipping Weight||7.05 KG|
|Shipping Height||178.00 mm|
|Shipping Width||241.00 mm|
|Shipping Depth||368.00 mm|
|Master Carton Units||2.00|
|SCC Codes||107 31304 01635 6|
|Units per Pallet||48.00|
|Operating Environment||0 - 40 °C|
|Operating Relative Humidity||0 - 95%|
|Operating Elevation||0-3000 meters|
|Storage Temperature||-15 - 45 °C|
|Storage Relative Humidity||0 - 95%|
|Storage Elevation||0-15000 meters|
|Audible noise at 1 meter from surface of unit||40.00 dBA|
|Online Thermal Dissipation||24.00 BTU/hr|
|Regulatory Approvals||C-tick, CE, EN 50091-1, EN 50091-2, GOST, VDE|
|Standard Warranty||2 years repair or replace|
|Equipment protection policy||Lifetime : 100000 Euro, Lifetime : 50000 GBP|
|Sustainable Offer Status|
|REACH||REACH: Contains No SVHCs|
CD with software
1 - Detachable 1.2 m IEC power cord
1 - Detachable 1.8 m IEC power cord
*Box quantity refers to the number of units contained in this product's outer packaging. It does not refer to the number of products purchased for the quoted unit price unless otherwise stated.
APC BK500EI Back-UPS CS-300W/500 VA-Input 230v
- Brand: APC
- Product Code: APC BK500EI Back-UPS CS-3
- Availability: In Stock Ships in 1-2 days
Are you a VAR / Distributor?
Up to 15% Commission.
No MOQs. No Signup Fees.
Portable Server Room Diagnostic Sensor Toolkit
Despite advances in CFD software and pre-deployment simulations of data center environments. The majority of server rooms, remote sites and data centers are not designed to handle ever increasing loads and the heat generated by that increased activity.
WIRELESS WORKFLOW enables early diagnostics of any server room or data center facility. Detecting problems arising from under or over cooling, hot air re-circulation in IT rack space and air delivery resulting in high or low air pressure in raised floors and dropped ceiling plenums.Read the full article
Diagnosing server room temperature problems
Diagnose temperature differentials, pressure differentials and more...
AVTECH Room Alert 12E - Sensor Monitoring
Monitor temperature, humidity, power, room access and more...
AKCP SP2+ Temperature Monitoring
SP2+ monitors and logs temperature, humidity and more. SNMPv3 compliant, encrypted email and more...
Smart Cooling for Data Centers
Keeping temperatures in ASHRAE safe thermal envelopes.
AKCP SP2+ Temperature Sensor for Server Rooms
Front and rear thermal mapping for any server cabinet.
Monitor and manage server room environmental and security conditions over an IP network.