• APC BR1500GI Back-UPS Pro 1500VA LCD 230V

APC Back-UPS Pro, 865 Watts / 1500 VA, Input 230V / Output 230V , Interface Port USB , Extended runtime model

Key Features
  • Input Voltage - AC 230 V
  • Frequency Required - 50/60 Hz
  • Input Connector(s) - Power IEC 320 EN 60320 C14
  • Power Capacity - 865 Watt / 1500 VA
  • Remote Management Interface - RS-232, USB

Features

Green mode 
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.

Battery failure notification 
Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Power-saving outlets 
Automatically cuts power to idle equipment to conserve electricity.

Resettable circuit breaker 
Easy recovery from overloads; no need to replace a fuse.

Extendable Run Time 
Additional batteries can be added to provide power to the load for an extended period of time in the event of utility supply failure.

Battery-protected and surge-only outlets 
Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment

Cold-start capable 
Provides temporary battery power when the utility power is out.

Hot-swappable batteries 
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

Disconnected battery notification 
Warns when a battery is not available to provide backup power.

Dataline Surge Protection 
Provides protection of connected equipment from power surges on the data lines.

Automatic self-test 
Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Adjustable voltage-transfer points 
Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.

Adjustable voltage sensitivity 
Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.

Audible alarms 
Provides notification of changing utility power and UPS power conditions

User-replaceable batteries 
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

USB connectivity 
Provides management of the UPS via a USB port (not available on all models).

Serial Connectivity 
Provides management of the UPS via a serial port.

Transformer-block spaced outlets 
Protect equipment with input transformer blocks without blocking access to other receptacles.

Boost and Trim Automatic Voltage Regulation (AVR) 
Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).

Intelligent battery management 
Maximizes battery performance, life, and reliability through intelligent, precision charging.

Safety-agency approved 
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Building Wiring Fault Indicator 
This LED informs users of potentially dangerous wiring problems in the wall circuit.

Battery replacement without tools 
Enables fast battery replacement, lowering Mean Time to Repair (MTTR).

LCD graphics display 
Text and mimic diagrams that display modes of operation, system parameters and alarms.

Protection

Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.

Dataline Surge Protection
Provides protection of connected equipment from power surges on the data lines.

Surge only outlets
Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.

Availability

Energy Management Function
Energy saving feature automatically power off peripherals when the a master device, usually a PC, hibernates or is shut down.Power to peripherals is immediately restored when the master device wakes up or is switched on.

Boost and Trim Automatic Voltage Regulation (AVR)
Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).

Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.

Customizable voltage-transfer points
Adjust the voltage points (widen or tighten the range) where your UPS transfers to battery to maximize useful battery life and protect sensitive electronics.

Customizable voltage sensitivity
Toggle between pre-determined voltage-transfer points depending on your power quality (high, medium or low sensitivity), maximizing useful battery life and protecting sensitive electronics.

Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.

Cold-start capable
Provides temporary battery power when the utility power is out.

Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Transformer-block spaced outlets
Protect equipment with input transformer blocks without blocking access to other receptacles.

Servicability

Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse.

Simple battery replacement
Increases UPS availability by allowing quick, easy battery replacement.

Manageability

USB connection
Use your PC to access additional power protection and management features for your UPS via a USB Port.

LCD Status Display
Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.

Audible alarms
Provides notification of changing utility power and UPS power conditions

Disconnected battery notification
Warns when a battery is not available to provide backup power.

Safety

Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Specification

Output
Output Power Capacity 865 Watts / 1500 VA
Max Configurable Power 865 Watts / 0 VA
Nominal Output Voltage 230V
Output Frequency (sync to mains) 50/60Hz +/- 3 Hz
Crest Factor 3 : 1
Topology Line Interactive
Waveform Type Stepped approximation to a sinewave
Output Connections (5) IEC 320 C13 (Battery Backup)   
(5) IEC 320 C13 (Surge Protection)    
(2) IEC Jumpers (Battery Backup)
Input
Nominal Input Voltage 230V
Input Frequency 50/60 Hz +/- 3 Hz (auto sensing)
Input Connections IEC-320 C14
Input voltage range for main operations 176-294V
Input voltage adjustable range for mains operation 156-300V
Input Breaker Capacity 10.0A
Batteries & Runtime
Battery Type Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Typical recharge time 8 hour(s)
Replacement Battery APCRBC124, APCRBC124J
RBC™ Quantity 1
Extended Run Options APC Power-Saving Back-UPS Pro 1500, 230V
Communications & Management
Interface Port(s) DB-9 RS-232, USB
Control panel Multi-function LCD status and control console
Audible Alarm Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
Surge Protection and Filtering
Surge energy rating 441 Joules
Filtering Full time multi-pole noise filtering :10% of IEEE surge let-thgouh : zero clamping response time: instantaneous
Data Line Protection Analog phone line for phone/fax/modem/DSL (RJ-11 connector), Network line - 10/100/1000 Base-T Ethernet (RJ-45 connector)
Physical
Maximum Height 301.00 mm
Maximum Width 112.00 mm
Maximum Depth 380.00 mm
Net Weight 12.70 KG
Shipping Weight 14.30 KG
Shipping Height 387.00 mm
Shipping Width 238.00 mm
Shipping Depth 488.00 mm
Master Carton Units 1.00
Color Black
SCC Codes 1073130426874 8
Units per Pallet 20.00
Environmental
Operating Environment 0 - 40 °C
Operating Relative Humidity 0 - 95%
Operating Elevation 0-9000 meters
Storage Temperature -15 - 45 °C
Storage Relative Humidity 0 - 95%
Storage Elevation 0-15000 meters
Audible noise at 1 meter from surface of unit 45.00 dBA
Conformance
Regulatory Approvals A-tick, C-tick, CE, GOST, GS Mark, Telepermit, TUV
Standard Warranty 2 years repair or replace, 3 years repair or replace for European Union countries
Sustainable Offer Status
RoHS Compliant
REACH REACH: Contains No SVHCs

Box Contents

CD with software
2 x - Detachable 2.0 m IEC power cords
Telephone Cable
USB cable
User Manual
Warranty card


*Box quantity refers to the number of units contained in this product's outer packaging. It does not refer to the number of products purchased for the quoted unit price unless otherwise stated.

Write a review

Please login or register to review

APC BR1500GI Back-UPS Pro 1500VA LCD 230V

  • Brand: APC
  • Product Code: APC BR1500GI Back-UPS Pro
  • Availability: In Stock Ships in 1-2 days
  • $420.00



Are you a VAR / Distributor?
Up to 15% Commission.
No MOQs. No Signup Fees.

Tags: apc, br1500gi, back, ups, pro, 1500va, lcd, 230v



Featured Article

Portable Server Room Diagnostic Sensor Toolkit

Despite advances in CFD software and pre-deployment simulations of data center environments. The majority of server rooms, remote sites and data centers are not designed to handle ever increasing loads and the heat generated by that increased activity.

WIRELESS WORKFLOW enables early diagnostics of any server room or data center facility. Detecting problems arising from under or over cooling, hot air re-circulation in IT rack space and air delivery resulting in high or low air pressure in raised floors and dropped ceiling plenums.

Read the full article

Diagnosing server room temperature problems

Diagnose temperature differentials, pressure differentials and more...


AVTECH Room Alert 12E - Sensor Monitoring

Monitor temperature, humidity, power, room access and more...


AKCP SP2+ Temperature Monitoring

SP2+ monitors and logs temperature, humidity and more. SNMPv3 compliant, encrypted email and more...

Smart Cooling for Data Centers

Keeping temperatures in ASHRAE safe thermal envelopes.


AKCP SP2+ Temperature Sensor for Server Rooms

Front and rear thermal mapping for any server cabinet.


NTI Enviromux Micro-T SNMP Temperature Sensor

Monitor and manage server room environmental and security conditions over an IP network.


CTSI Limited - Complete Technology Systems Integration

At CTSI we've worked with some of the largest companies in the world, bringing our expertise to bear on many complex server room monitoring projects. Feel free to contact us today at sales@ctsilimited.com and make your project a success.