• APC BX1100CI Back-UPS 1100VA with AVR, IEC, 230V

APC Back-UPS,660 Watts /1100 VA,Input 230V /Output 230V

Features

Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Overload protection
Safeguards unit from damage by automatically turning it off in the event of a short circuit or overload.

Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse.

Replace Battery LED
An external Replace Battery LED informs the end-user that the battery needs to be replaced.

Cold-start capable
Provides temporary battery power when the utility power is out.

Disconnected battery notification
Warns when a battery is not available to provide backup power.

Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Adjustable voltage sensitivity
Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.

Audible alarms
Provides notification of changing utility power and UPS power conditions

Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.

Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.

Protection

Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.

Surge only outlets
Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.

Availability

Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.

Serviceability

Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse.

Manageability

Audible alarms
Provides notification of changing utility power and UPS power conditions

LED status display
Quickly understand unit and power status with visual indicators.

Safety

Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Specification

Output 
Output Power Capacity 660 Watts / 1100 VA 
Max Configurable Power 660 Watts / 1100 VA 
Nominal Output Voltage 230V 
Efficiency at Full Load 97.0%  
Output Frequency (sync to mains) 50/60Hz +/- 3 Hz  
Topology
Line Interactive
Waveform Type Stepped approximation to a sinewave 
Output Connections (6) IEC 320 C13 (Battery Backup)
(2) IEC Jumpers (Battery Backup)  
Efficiency at Half Load 95.0%  
Input 
Nominal Input Voltage
230V
Input Frequency 50/60 Hz +/- 3 Hz (auto sensing) 
Input Connections IEC-320 C14  
Cord Length 1.16 meters
Input voltage range for main operations 150 - 280V 
Maximum Input Current 5A  
Input Breaker Capacity 10.0  A 
Batteries & Runtime 
Battery Type Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof  
Typical recharge time
8 hour(s)
Replacement Battery APCRBC113 
RBC™ Quantity 1
Communications & Management 
Control panel LED Status display with On Line : On Battery  
Audible Alarm
Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm 
Surge Protection and Filtering 
Surge energy rating 273 Joules 
Data Line Protection -- 
Physical 
Maximum Height
215.00 mm 
Maximum Width 130.00 mm 
Maximum Depth 336.00 mm  
Net Weight 12.00 KG 
Shipping Weight 12.92 KG  
Shipping Height 295.00 mm  
Shipping Width 245.00 mm 
Shipping Depth 440.00 mm  
Master Carton Units 1.00 
Color Black 
SCC Codes
0073130429134 3
Units per Pallet 32.00  
Environmental 
Operating Environment 0 - 40 °C  
Operating Relative Humidity 0 - 95%  
Operating Elevation 0-3000 meters  
Storage Temperature
-15 - 40 °C
Storage Relative Humidity 0 - 95%  
Storage Elevation 0-9000 meters 
Audible noise at 1 meter from surface of unit 45.00 dBA  
Conformance 
Regulatory Approvals CE, EN/IEC 60950-1, GOST, NEMKO  
Standard Warranty 2 years repair or replace  
Equipment protection policy
No EPP for ASEAN
Sustainable Offer Status 
RoHS Compliant  
REACH REACH: Contains No SVHCs  

Includes: User Manual, Warranty card

 


*Box quantity refers to the number of units contained in this product's outer packaging. It does not refer to the number of products purchased for the quoted unit price unless otherwise stated.

Write a review

Please login or register to review

APC BX1100CI Back-UPS 1100VA with AVR, IEC, 230V

  • Brand: APC
  • Product Code: APC BX1100CI Back-UPS 110
  • Availability: In Stock Ships in 1-2 days
  • $155.00



Are you a VAR / Distributor?
Up to 15% Commission.
No MOQs. No Signup Fees.

Tags: apc, bx1100ci, back, ups, 1100va, with, avr, , iec, , 230v



Featured Article

Portable Server Room Diagnostic Sensor Toolkit

Despite advances in CFD software and pre-deployment simulations of data center environments. The majority of server rooms, remote sites and data centers are not designed to handle ever increasing loads and the heat generated by that increased activity.

WIRELESS WORKFLOW enables early diagnostics of any server room or data center facility. Detecting problems arising from under or over cooling, hot air re-circulation in IT rack space and air delivery resulting in high or low air pressure in raised floors and dropped ceiling plenums.

Read the full article

Diagnosing server room temperature problems

Diagnose temperature differentials, pressure differentials and more...


AVTECH Room Alert 12E - Sensor Monitoring

Monitor temperature, humidity, power, room access and more...


AKCP SP2+ Temperature Monitoring

SP2+ monitors and logs temperature, humidity and more. SNMPv3 compliant, encrypted email and more...

Smart Cooling for Data Centers

Keeping temperatures in ASHRAE safe thermal envelopes.


AKCP SP2+ Temperature Sensor for Server Rooms

Front and rear thermal mapping for any server cabinet.


NTI Enviromux Micro-T SNMP Temperature Sensor

Monitor and manage server room environmental and security conditions over an IP network.


CTSI Limited - Complete Technology Systems Integration

At CTSI we've worked with some of the largest companies in the world, bringing our expertise to bear on many complex server room monitoring projects. Feel free to contact us today at sales@ctsilimited.com and make your project a success.