• APC BX700UI Back-UPS 700VA, 230V, AVR, IEC Sockets

APC Back-UPS,390 Watts /700 VA,Input 230V /Output 230V

USB connection 
Use your PC to access additional power protection and management features for your UPS via a USB Port.

Telephone dataline surge protection
Provides protection of connected equipment from power surges traveling on telephone lines.

Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.

Protection

Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.

Surge only outlets
Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.

Availability

Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.

Serviceability

Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse.

Manageability

Audible alarms
Provides notification of changing utility power and UPS power conditions

LED status display
Quickly understand unit and power status with visual indicators.

Safety

Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Specifications

Output 
Output Power Capacity 390 Watts / 700 VA
Max Configurable Power 390 Watts / 700 VA
Nominal Output Voltage 230V
Output Frequency (sync to mains) 50/60 Hz +/-1 Hz
Topology Line Interactive
Waveform Type Stepped approximation to a sinewave
Output Connections (4) IEC 320 C13 (Battery Backup)
Input 
Nominal Input Voltage 230V
Input Frequency 50/60 Hz +/- 3 Hz (auto sensing)
Input Connections IEC-320 C14
Cord Length 1.22 meters
Input voltage range for main operations 140 - 300V
Input Breaker Capacity 7A
Batteries & Runtime 
Battery Type Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Typical recharge time
6 hour(s)
Replacement Battery
Communications & Management 
Control panel LED status display with On Line : On Battery : Replace Battery and Overload indicators
Audible Alarm Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
Surge Protection and Filtering 
Surge energy rating
273 Joules
Data Line Protection RJ-11 Modem/Fax/DSL protection (two wire single line)
Physical 
Maximum Height 200.00 mm
Maximum Width 115.00 mm
Maximum Depth 256.00 mm
Net Weight
6.00 KG
Shipping Weight 6.50 KG
Shipping Height 275.00 mm
Shipping Width 295.00 mm
Shipping Depth 340.00 mm
Environmental 
Operating Environment 0 - 40 °C
Operating Relative Humidity 0 - 95% no%
Operating Elevation 0-3000 meters
Storage Temperature -15 - 40 °C
Storage Relative Humidity 0 - 95% no%
Storage Elevation 0-9000 meters
Audible noise at 1 meter from surface of unit 45.00 dBA
Conformance 
Standard Warranty 2 years repair or replace
Sustainable Offer Status 
RoHS Compliant
REACH
REACH: Contains No SVHCs

Includes: User Manual


*Box quantity refers to the number of units contained in this product's outer packaging. It does not refer to the number of products purchased for the quoted unit price unless otherwise stated.

Write a review

Please login or register to review

APC BX700UI Back-UPS 700VA, 230V, AVR, IEC Sockets

  • Brand: APC
  • Product Code: APC BX700UI Back-UPS 700V
  • Availability: In Stock Ships in 1-2 days
  • $85.00



Are you a VAR / Distributor?
Up to 15% Commission.
No MOQs. No Signup Fees.

Tags: apc, bx700ui, back, ups, 700va, , 230v, , avr, , iec, sockets



Featured Article

Portable Server Room Diagnostic Sensor Toolkit

Despite advances in CFD software and pre-deployment simulations of data center environments. The majority of server rooms, remote sites and data centers are not designed to handle ever increasing loads and the heat generated by that increased activity.

WIRELESS WORKFLOW enables early diagnostics of any server room or data center facility. Detecting problems arising from under or over cooling, hot air re-circulation in IT rack space and air delivery resulting in high or low air pressure in raised floors and dropped ceiling plenums.

Read the full article

Diagnosing server room temperature problems

Diagnose temperature differentials, pressure differentials and more...


AVTECH Room Alert 12E - Sensor Monitoring

Monitor temperature, humidity, power, room access and more...


AKCP SP2+ Temperature Monitoring

SP2+ monitors and logs temperature, humidity and more. SNMPv3 compliant, encrypted email and more...

Smart Cooling for Data Centers

Keeping temperatures in ASHRAE safe thermal envelopes.


AKCP SP2+ Temperature Sensor for Server Rooms

Front and rear thermal mapping for any server cabinet.


NTI Enviromux Micro-T SNMP Temperature Sensor

Monitor and manage server room environmental and security conditions over an IP network.


CTSI Limited - Complete Technology Systems Integration

At CTSI we've worked with some of the largest companies in the world, bringing our expertise to bear on many complex server room monitoring projects. Feel free to contact us today at sales@ctsilimited.com and make your project a success.