A versatile 3-phase UPS for facility, industrial and data center applications. Configurable system with a comprehensive range of accessories to meet your application demands.
Advanced electrical features
Excellent power conditioning, very low harmonic distortion through IGBT rectifier, input power factor correction, and high power efficiency
Dual mains input
Increases availability by allowing the UPS to be connected to two separate power sources.
Frequency and voltage regulation
Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
Increases total power capacity by using multiple uninterruptible power supplies simultaneously.
Power the connected equipment with multiple uninterruptible power supplies to increase system redundancy
Ensures clean, uninterrupted power to protected equipment when generator power is used.
Available in a wide range of configurations to suit any operating environment
LCD graphics display
Text and mimic diagrams that display modes of operation, system parameters and alarms.
Provide easy-to-read status of the unit and utility power conditions.
Network management capability
Full-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet.
Integrates with StruxureWare Central
An IT-ready, scalable access monitoring system that collects, organizes, and distributes critical alerts, surveillance video and key information, providing a unified view of complex physical infrastructure environments from anywhere on the network
Simplifies installation and UPS maintenance while minimizing space requirements.
Multiple levels of service
With the option of packages or individual service components, our services are structured to allow you to pick and choose what you would like APC to do for you.
Our experienced technical support engineers are available to answer your questions, giving you peace of mind knowing the help you need is there when you need it.
Total Cost of Ownership
Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection
Input power factor correction
Minimizes installation costs by enabling the use of smaller generators and cabling.
Predicitive failure notification
Provides early-warning fault analysis ensuring proactive component replacement.
Wide input voltage range
Designed for harsh electrical environments to save battery life.
|Bypass Voltage Tolerance||+/-10% settable from +/-4/6/8 and 10%|
|Max Bypass Input Current||58A|
|Output Power Capacity||36 kW / 40 kVA|
|Max Configurable Power||36 kW / 0 VA|
|Nominal Output Voltage||400V 3PH|
|Output Voltage Note||Configurable for 380 : 400 or 415 V 3 Phase nominal output voltage|
|Efficiency at Full Load||92.7%|
|Output Voltage Distortion||Less than 2%|
|Output Frequency (sync to mains)||50/60 Hz +/- 3 Hz user adjustable +/- 0.1|
|Other Output Voltages||380, 415|
|Crest Factor|| |
3 : 1
|Topology||Double Conversion Online|
|Waveform Type||Sine wave|
|Output Connections||(1) Hard Wire 4-wire (3PH + G)|
|Output Voltage Tolerance||+/-1% static and +/- 5% at 100% load step|
|Output Voltage THD|| |
< 1% linear load and < 2.5% nonlinear load
|Overload Operation||10 minutes @ 125% and 60 seconds @ 150%|
|Required Output Current Protection||58A|
|Bypass||Built-in Maintenance Bypass, Built-in Static Bypass, Optional External Bypass|
|Nominal Input Voltage||400V 3PH|
|Input Frequency||45 - 65 Hz|
|Input Connections||Hard Wire 4-wire (3PH + G) |
Hard Wire 4-wire (3PH + N)
|Input voltage range for main operations||323 - 437 (380V), 340 - 460 (400V), 353 - 477 (415V)V|
|Other Input Voltages||380, 415|
|Maximum Input Current||77A|
|Maximum Short Circuit Withstand (Icw)||20.0 kA|
|Input Total Harmonic Distortion||Less than 5% for full load|
|Type of Input Protection Required||gL fuse|
|Batteries & Runtime|
|Typical recharge time||10 hour(s)|
|Nominal Battery Voltage||432V|
|Communications & Management|
|Available SmartSlot™ Interface Quantity||2|
|Pre-Installed SmartSlot™ Cards||AP9635CH|
|Control panel||Multi-function LCD status and control console|
|Emergency Power Off (EPO)||Yes|
|Maximum Height||1900.00 mm|
|Maximum Width||712.00 mm|
|Maximum Depth||855.00 mm|
|Net Weight||1045.00 KG|
|Shipping Height||2030.00 mm|
|Shipping Width||980.00 mm|
|Shipping Depth|| |
|Operating Environment||0 - 40 °C|
|Operating Relative Humidity||0 - 95%|
|Operating Elevation||0-999.9 meters|
|Storage Temperature||-20 - 45 °C|
|Storage Relative Humidity||0 - 95%|
|Storage Elevation||0-12000 meters|
|Audible noise at 1 meter from surface of unit||55.50 dBA|
|Protection Class|| |
|Regulatory Approvals||CE, EN/IEC 62040-3, IEC 62040-1-2, IEC 62040-2, ISO 9001, TUV, VDE|
|Standard Warranty||1 year on-site repair or replace with factory authorized Start-Up, 1 year (parts only)|
Includes: Installation guide, Network Management Card, Start-Up Service, User Manual
*Box quantity refers to the number of units contained in this product's outer packaging. It does not refer to the number of products purchased for the quoted unit price unless otherwise stated.
APC G55TUPSU40HB15S MGE Galaxy 5500 40KVA 400V Single UPS
- Brand: APC
- Product Code: APC G55TUPSU40HB15S MGE G
- Availability: In Stock Ships in 1-2 days
Are you a VAR / Distributor?
Up to 15% Commission.
No MOQs. No Signup Fees.
Portable Server Room Diagnostic Sensor Toolkit
Despite advances in CFD software and pre-deployment simulations of data center environments. The majority of server rooms, remote sites and data centers are not designed to handle ever increasing loads and the heat generated by that increased activity.
WIRELESS WORKFLOW enables early diagnostics of any server room or data center facility. Detecting problems arising from under or over cooling, hot air re-circulation in IT rack space and air delivery resulting in high or low air pressure in raised floors and dropped ceiling plenums.Read the full article
Diagnosing server room temperature problems
Diagnose temperature differentials, pressure differentials and more...
AVTECH Room Alert 12E - Sensor Monitoring
Monitor temperature, humidity, power, room access and more...
AKCP SP2+ Temperature Monitoring
SP2+ monitors and logs temperature, humidity and more. SNMPv3 compliant, encrypted email and more...
Smart Cooling for Data Centers
Keeping temperatures in ASHRAE safe thermal envelopes.
AKCP SP2+ Temperature Sensor for Server Rooms
Front and rear thermal mapping for any server cabinet.
Monitor and manage server room environmental and security conditions over an IP network.