• APC SRT8KRMXLI Smart-UPS SRT 8000VA RM 230V

APC Smart-UPS On-Line,8000 Watts /8000 VA,Input 230V /Output 230V, Interface Port Contact Closure, RJ-45 10/100 Base-T, RJ-45 Serial, Smart-Slot, USB, Extended runtime model, Rack Height 6 U

LCD graphics display
Text and mimic diagrams that display modes of operation, system parameters and alarms.

10/100 BaseT Connection
Connect the device to a network using a 10 or 100 BaseT connection

Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.

Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Availability

Automatic internal bypass
Supplies utility power to the connected loads in the event of a UPS power overload or fault.

Scalable runtime
Allows additional run time to be quickly added as needed.

Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.

Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.

Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.

Manageability

Network manageable
Provides remote power management of the UPS over the network.

InfraStruXure Manager Compatible
Enables centralized management via the APC InfraStruXure Manager.

SmartSlot
Customize UPS capabilities with management cards.

LED status indicators
Quickly understand unit and power status with visual indicators.

Serial connectivity
Provides management of the UPS via a serial port.

Adaptability

Plug-and-Play external batteries
Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.

Rack/Tower convertible
Protects the initial investment in the UPS when migrating from tower to rack-mount environment.

Flash upgradeable firmware
Install maintenance releases of firmware remotely using FTP.

Serviceability

User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Predicitive failure notification
Provides early-warning fault analysis ensuring proactive component replacement.

Disconnected battery notification
Warns when a battery is not available to provide backup power.

Audible alarms
Provides notification of changing utility power and UPS power conditions

Protection

Frequency and voltage regulation
Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.

Power conditioning
Protects connected loads from surges, spikes, lightning, and other power disturbances.

Input power factor correction
Minimizes installation costs by enabling the use of smaller generators and cabling.

Generator compatible
Ensures clean, uninterrupted power to protected equipment when generator power is used.

Cold-start capable
Provides temporary battery power when the utility power is out.

Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse.

Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Specification

Output 
Output Power Capacity 8000 Watts / 8000 VA
Max Configurable Power 8000 Watts / 8000 VA
Nominal Output Voltage 230V
Output Voltage Distortion Less than 3%
Output Frequency (sync to mains) 50/60Hz +/- 3 Hz
Other Output Voltages
220, 240
Crest Factor 3 : 1
Topology Double Conversion Online
Waveform Type Sine wave
Output Connections (1) Hard Wire 3-wire (H N + G)
(6) IEC 320 C13
(4) IEC 320 C19
(3) IEC Jumpers
Bypass
Internal Bypass (Automatic and Manual)
Input 
Nominal Input Voltage
230V
Input Frequency 45 - 65 Hz (auto sensing)
Input Connections Hard Wire 3 wire (1PH+N+G)
Hard Wire 5-wire (3PH + N + G)
Other Input Voltages 220, 240
Batteries & Runtime 
Battery Type Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Typical recharge time 1.50 hour(s)
RBC Quantity 2
Extrended Run Options APC Smart-UPS SRT 8000VA RM 230V
Communications & Management 
Interface Port(s) Contact Closure, RJ-45 10/100 Base-T, RJ-45 Serial, Smart-Slot, USB
Available SmartSlot Interface Quantity 1
Control Panel Multi-function LCD status and control console
Audible Alarm Audible and visible alarms prioritized by severity
Emergency Power Off (EPO) Yes
Surge Protection and Filtering 
Surge Energy Rating 480 Joules
Physical 
Maximum Height 263.00 mm
Maximum Width 432.00 mm
Maximum Depth 715.00 mm
Rack Height 6U
Net Weight 111.82 KG
Shipping Weight 130.00 KG
Shipping Height 461.00 mm
Shipping Width 600.00 mm
Shipping Depth 1000.00 mm
Color
Black
Units per Pallet 1.00
Environmental 
Operating Environment 0 - 40 °C
Operating Relative Humidity 0 - 95% no%
Operating Elevation 0-900 meters
Storage Temperature -15 - 45 °C
Storage Relative Humidity 0 - 95% no%
Storage Elevation 0-4500 meters
Audible noise at 1 meter from surface of unit 55.00 dBA
Online Thermal Dissipation 1497.00 BTU/hr
Protection Class
IP 20
Conformance 
Regulatory Approvals CE, CE Mark
Standard Warranty 3 years repair or replace (excluding battery) and 2 years for battery
Sustainable Offer Status 
RoHS Compliant
REACH REACH: Contains No SVHCs
Battery Directive Compliant
Battery Notes Contains Lithium Coin Cell

Includes: CD with software, Documentation CD, Installation guide, Rack Mounting brackets, Rack mounting hardware, Rack Mounting support rails, Temperature Probe, USB cable, Warranty card


*Box quantity refers to the number of units contained in this product's outer packaging. It does not refer to the number of products purchased for the quoted unit price unless otherwise stated.

Write a review

Please login or register to review

APC SRT8KRMXLI Smart-UPS SRT 8000VA RM 230V

  • Brand: APC
  • Product Code: APC SRT8KRMXLI Smart-UPS
  • Availability: In Stock Ships in 1-2 days
  • $5,985.00



Are you a VAR / Distributor?
Up to 15% Commission.
No MOQs. No Signup Fees.

Tags: apc, srt8krmxli, smart, ups, srt, 8000va, rm, 230v



Featured Article

Portable Server Room Diagnostic Sensor Toolkit

Despite advances in CFD software and pre-deployment simulations of data center environments. The majority of server rooms, remote sites and data centers are not designed to handle ever increasing loads and the heat generated by that increased activity.

WIRELESS WORKFLOW enables early diagnostics of any server room or data center facility. Detecting problems arising from under or over cooling, hot air re-circulation in IT rack space and air delivery resulting in high or low air pressure in raised floors and dropped ceiling plenums.

Read the full article

Diagnosing server room temperature problems

Diagnose temperature differentials, pressure differentials and more...


AVTECH Room Alert 12E - Sensor Monitoring

Monitor temperature, humidity, power, room access and more...


AKCP SP2+ Temperature Monitoring

SP2+ monitors and logs temperature, humidity and more. SNMPv3 compliant, encrypted email and more...

Smart Cooling for Data Centers

Keeping temperatures in ASHRAE safe thermal envelopes.


AKCP SP2+ Temperature Sensor for Server Rooms

Front and rear thermal mapping for any server cabinet.


NTI Enviromux Micro-T SNMP Temperature Sensor

Monitor and manage server room environmental and security conditions over an IP network.


CTSI Limited - Complete Technology Systems Integration

At CTSI we've worked with some of the largest companies in the world, bringing our expertise to bear on many complex server room monitoring projects. Feel free to contact us today at sales@ctsilimited.com and make your project a success.