• APC SUA3000XLI Smart-UPS XL 3000VA 230V 5U Tower/Rack Convertible

APC Smart-UPS, 2700 Watts/3000 VA, Input 230V/Output 230V, Interface Port DB-9 RS-232, SmartSlot, Rack Height 5U

Features

Replace Battery LED
An external Replace Battery LED informs the end-user that the battery needs to be replaced.

USB connectivity
Provides management of the UPS via a USB port (not available on all models).

Rack/Tower convertible
Protects the initial investment in the UPS when migrating from tower to rack-mount environment.

Availability

Boost and Trim Automatic Voltage Regulation (AVR)
Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).

Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.

Power conditioning
Protects connected loads from surges, spikes, lightning, and other power disturbances.

Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.

Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.

Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Disconnected battery notification
Warns when a battery is not available to provide backup power.

Manageability

Network manageable
Provides remote power management of the UPS over the network.

Audible alarms
Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition.

LED status indicators
Quickly understand unit and power status with visual indicators.

Serial Connectivity
Provides management of the UPS via a serial port.

USB connectivity
Provides management of the UPS via a USB port (not available on all models).

Disconnected battery notification
Warns when a battery is not available to provide backup power.

Serviceability

User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

Predictive failure notification
Provides early-warning fault analysis ensuring proactive component replacement.

Resettable circuit breakers
Enables a quick recovery from overload events.

Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Adaptability

Adjustable voltage-transfer points
Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.

Adjustable voltage sensitivity
Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.

Safety

Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Specification

Output 
Output Power Capacity
2700 Watts / 3000 VA
Max Configurable Power
2700 Watts / 3000 VA
Nominal Output Voltage 230V
Output Voltage Note Configurable for 220 : 230 or 240 nominal output voltage
Efficiency at Full Load 95.0%
Output Voltage Distortion Less than 5% at full load
Output Frequency (sync to mains) 47 - 53 Hz for 50 Hz nominal, 57 - 63 Hz for 60 Hz nominal
Topology Line Interactive
Waveform Type Sine wave
Output Connections (8) IEC 320 C13
(1) IEC 320 C19
(2) IEC Jumpers
Input 
Nominal Input Voltage 230V
Input Frequency 50/60 Hz +/- 5 Hz (auto sensing)
Input Connections IEC-320 C20  
Schuko CEE 7 / EU1-16P  
British BS1363A
Input voltage range for main operations 160 - 286V
Input voltage adjustable range for mains operation 151 - 302V
Batteries & Runtime 
Battery Type Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Typical recharge time 3 hour(s)
Replacement Battery RBC55
RBC™ Quantity 1
Extended Run Options APC Smart-UPS XL 3000VA 230V Tower/Rack Convertible
Communications & Management 
Interface Port(s) DB-9 RS-232, SmartSlot, USB
Available SmartSlot™ Interface Quantity 1
Control panel LED status display with load and battery bar-graphs and On Line : On Battery : Replace Battery : and Overload Indicators
Audible Alarm Alarm when on battery : distinctive low battery alarm : configurable delays
Emergency Power Off (EPO) Yes
Surge Protection and Filtering 
Surge energy rating
480 Joules
Filtering Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449
Physical 
Maximum Height 444.00 mm
Maximum Width 221.00 mm
Maximum Depth 495.00 mm
Rack Height 5U
Net Weight 55.00 KG
Shipping Weight 83.00 KG 
Shipping Height 520.00 mm 
Shipping Width 600.00 mm 
Shipping Depth 775.00 mm 
Color Black  
Units per Pallet 2.00 
Environmental 
Operating Environment
0 - 40 °C
Operating Relative Humidity
0 - 95% 
Operating Elevation 0-3000 meters 
Storage Temperature -15 - 45 °C 
Storage Relative Humidity 0 - 95% 
Storage Elevation 0-15000 meters 
Audible noise at 1 meter from surface of unit 53.00 dBA 
Online Thermal Dissipation 305.00 BTU/hr 
Conformance 
Regulatory Approvals C-tick, CE, EN 50091-1, EN 50091-2, GOST, VDE 
Standard Warranty 2 years repair or replace, optional on-site warranties available, optional extended warranties available
Sustainable Offer Status 
RoHS Compliant  

Includes: CD with software, Smart UPS signalling RS-232 cable, User Manual


*Box quantity refers to the number of units contained in this product's outer packaging. It does not refer to the number of products purchased for the quoted unit price unless otherwise stated.

Write a review

Please login or register to review

APC SUA3000XLI Smart-UPS XL 3000VA 230V 5U Tower/Rack Convertible

  • Brand: APC
  • Product Code: APC SUA3000XLI Smart-UPS
  • Availability: In Stock Ships in 1-2 days
  • $1,900.00



Are you a VAR / Distributor?
Up to 15% Commission.
No MOQs. No Signup Fees.

Tags: apc, sua3000xli, smart, ups, xl, 3000va, 230v, 5u, towerrack, convertible



Featured Article

Portable Server Room Diagnostic Sensor Toolkit

Despite advances in CFD software and pre-deployment simulations of data center environments. The majority of server rooms, remote sites and data centers are not designed to handle ever increasing loads and the heat generated by that increased activity.

WIRELESS WORKFLOW enables early diagnostics of any server room or data center facility. Detecting problems arising from under or over cooling, hot air re-circulation in IT rack space and air delivery resulting in high or low air pressure in raised floors and dropped ceiling plenums.

Read the full article

Diagnosing server room temperature problems

Diagnose temperature differentials, pressure differentials and more...


AVTECH Room Alert 12E - Sensor Monitoring

Monitor temperature, humidity, power, room access and more...


AKCP SP2+ Temperature Monitoring

SP2+ monitors and logs temperature, humidity and more. SNMPv3 compliant, encrypted email and more...

Smart Cooling for Data Centers

Keeping temperatures in ASHRAE safe thermal envelopes.


AKCP SP2+ Temperature Sensor for Server Rooms

Front and rear thermal mapping for any server cabinet.


NTI Enviromux Micro-T SNMP Temperature Sensor

Monitor and manage server room environmental and security conditions over an IP network.


CTSI Limited - Complete Technology Systems Integration

At CTSI we've worked with some of the largest companies in the world, bringing our expertise to bear on many complex server room monitoring projects. Feel free to contact us today at sales@ctsilimited.com and make your project a success.