• APC SUA5000RMI5U Smart-UPS 5000VA 230V 5U Rackmount/Tower

APC Smart-UPS, 4000 Watts / 5000 VA, Input 230V / Output 230V , Interface Port DB-9 RS-232, SmartSlot , Rack Height 5U

Features

SmartSlot
Customize UPS capabilities with management cards.

Cold-start capable
Provides temporary battery power when the utility power is out.

Resettable circuit breakers
Enables a quick recovery from overload events.

Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

Disconnected battery notification
Warns when a battery is not available to provide backup power.

Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Adjustable voltage-transfer points
Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.

Audible alarms
Provides notification of changing utility power and UPS power conditions

Serial Connectivity
Provides management of the UPS via a serial port.

Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.

Boost and Trim Automatic Voltage Regulation (AVR)
Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).

Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Rack/Tower convertible
Protects the initial investment in the UPS when migrating from tower to rack-mount environment.

Network manageable
Provides remote power management of the UPS over the network.

Availability

Boost and Trim Automatic Voltage Regulation (AVR)
Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).

Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.

Power conditioning
Protects connected loads from surges, spikes, lightning, and other power disturbances.

Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.

Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.

Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Disconnected battery notification
Warns when a battery is not available to provide backup power.

Manageability

Network manageable
Provides remote power management of the UPS over the network.

Audible alarms
Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition.

LED status indicators
Quickly understand unit and power status with visual indicators.

Serial Connectivity
Provides management of the UPS via a serial port.

USB connectivity
Provides management of the UPS via a USB port (not available on all models).

Disconnected battery notification
Warns when a battery is not available to provide backup power.

Serviceability

User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

Predictive failure notification
Provides early-warning fault analysis ensuring proactive component replacement.

Resettable circuit breakers
Enables a quick recovery from overload events.

Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Adaptability

Adjustable voltage-transfer points
Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.

Adjustable voltage sensitivity
Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.

Safety

Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Specification

Output 
Output Power Capacity 4000 Watts / 5000 VA 
Max Configurable Power 4000 Watts / 5000 VA 
Nominal Output Voltage 230V 
Output Voltage Note Configurable for 220 : 230 or 240 nominal output voltage 
Efficiency at Full Load 96.0% 
Output Voltage Distortion
Less than 5% at full load 
Output Frequency (sync to mains) 47 - 53 Hz for 50 Hz nominal  
Other Output Voltages 220, 240 
Topology Line Interactive 
Waveform Type Sine wave 
Output Connections (8) IEC 320 C13
(2) IEC 320 C19
(4) IEC Jumpers  
Input  
Nominal Input Voltage   230V 
Input Frequency   50/60 Hz +/- 3 Hz (auto sensing)  
Input Connections  Hard Wire 3-wire  
Input voltage range for main operations  160 - 286V 
Input voltage adjustable range for mains operation  151 - 302V  
Batteries & Runtime 
Battery Type  VRLA 
Typical recharge time  3 hour(s) 
Replacement Battery   RBC55 
RBC™ Quantity    2
Communications & Management  
Interface Port(s) 
DB-9 RS-232, SmartSlot 
Pre-Installed SmartSlot™ Cards  AP9630 
Control panel  LED status display with On Line : On Battery : Replace Battery and Overload indicators 
Audible Alarm  Audible and visible alarms : configurable delays 
Surge Protection and Filtering  
Surge energy rating   480 Joules  
Filtering  Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449  
Physical 
Maximum Height  222.00 mm 
Maximum Width  483.00 mm  
Maximum Depth   660.00 mm 
Rack Height  5U 
Net Weight 97.73 KG 
Shipping Weight  106.82 KG  
Shipping Height   635.00 mm 
Shipping Width  610.00 mm 
Shipping Depth  762.00 mm  
Color  Black  
Units per Pallet   3.00
Environmental  
Operating Environment  
0 - 40 °C
Operating Relative Humidity  0 - 95%  
Operating Elevation  0-3000 meters  
Storage Temperature  -15 - 45 °C 
Storage Relative Humidity 
0 - 95%
Storage Elevation  0-15000 meters  
Audible noise at 1 meter from surface of unit  53.00 dBA 
Online Thermal Dissipation   430.00 BTU/hr  
Conformance  
Regulatory Approvals  C-tick, CE, EN 50091-1, EN 50091-2, GOST, GS Mark, VDE  
Standard Warranty   2 years repair or replace  
Equipment protection policy  -- 
Sustainable Offer Status  
RoHS  Compliant  
REACH  REACH: Contains No SVHCs  

Includes: CD with software, Documentation CD, Installation guide, Rack mounting hardware, Rack Mounting support rails, Smart UPS signalling RS-232 cable, User Manual, Web/SNMP Management Card  


*Box quantity refers to the number of units contained in this product's outer packaging. It does not refer to the number of products purchased for the quoted unit price unless otherwise stated.

Write a review

Please login or register to review

APC SUA5000RMI5U Smart-UPS 5000VA 230V 5U Rackmount/Tower

  • Brand: APC
  • Product Code: APC SUA5000RMI5U Smart-UP
  • Availability: In Stock Ships in 1-2 days
  • $3,555.00



Are you a VAR / Distributor?
Up to 15% Commission.
No MOQs. No Signup Fees.

Tags: apc, sua5000rmi5u, smart, ups, 5000va, 230v, 5u, rackmounttower



Featured Article

Portable Server Room Diagnostic Sensor Toolkit

Despite advances in CFD software and pre-deployment simulations of data center environments. The majority of server rooms, remote sites and data centers are not designed to handle ever increasing loads and the heat generated by that increased activity.

WIRELESS WORKFLOW enables early diagnostics of any server room or data center facility. Detecting problems arising from under or over cooling, hot air re-circulation in IT rack space and air delivery resulting in high or low air pressure in raised floors and dropped ceiling plenums.

Read the full article

Diagnosing server room temperature problems

Diagnose temperature differentials, pressure differentials and more...


AVTECH Room Alert 12E - Sensor Monitoring

Monitor temperature, humidity, power, room access and more...


AKCP SP2+ Temperature Monitoring

SP2+ monitors and logs temperature, humidity and more. SNMPv3 compliant, encrypted email and more...

Smart Cooling for Data Centers

Keeping temperatures in ASHRAE safe thermal envelopes.


AKCP SP2+ Temperature Sensor for Server Rooms

Front and rear thermal mapping for any server cabinet.


NTI Enviromux Micro-T SNMP Temperature Sensor

Monitor and manage server room environmental and security conditions over an IP network.


CTSI Limited - Complete Technology Systems Integration

At CTSI we've worked with some of the largest companies in the world, bringing our expertise to bear on many complex server room monitoring projects. Feel free to contact us today at sales@ctsilimited.com and make your project a success.