APC Global Deployment,500 Watts /750 VA,Input 230V /Output 230V, Interface Port DB-9 RS-232, SmartSlot, USB
Global safety approvals
UL60950, CSA60950, IEC60950, EN60950 safety approvals. Meets IEC 61000-4-5 Immunity To Surge, and GR-1089-CORE, Section 4, Lightning and AC Power Faults standards.
Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Protects connected loads from surges, spikes, lightning, and other power disturbances.
Pure sine wave output on battery
Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Provide easy-to-read status of the unit and utility power conditions.
Provides management of the UPS via a serial port.
Customize UPS capabilities with management cards.
Easy to install
Innovative design allows for fast, easy installation by almost anybody.
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Our experienced technical support engineers are available to answer your questions, giving you peace of mind knowing the help you need is there when you need it.
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
|Output Power Capacity||500 Watts / 750 VA|
|Max Configurable Power||500 Watts / 750 VA|
|Nominal Output Voltage||230V|
|Output Voltage Note||Configurable for 220 or 230V nominal output voltage|
|Efficiency at Full Load||96.0%|
|Output Voltage Distortion||Less than 5% at full load|
|Waveform Type||Sine wave|
|Output Connections||(6) IEC 320 C13 |
(2) IEC Jumpers
|Nominal Input Voltage||230V|
|Input Frequency||50/60 Hz +/- 3 Hz (auto sensing)|
|Input Connections||IEC-320 C14|
|Input voltage range for main operations||160 - 285V|
|Input voltage adjustable range for mains operation||151 - 302V|
|Battieries & Runtime|
|Battery Type||Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof|
|Typical recharge time||3 hour(s)|
|Communications & Management|
|Interface Port(s)||DB-9 RS-232, SmartSlot, USB|
|Available SmartSlot™ Interface Quantity||1|
|Control panel||LED status display with load and battery bar-graphs and On Line : On Battery : Replace Battery : and Overload Indicators|
|Audible Alarm||Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm|
|Surge Protection and Filtering|
|Surge energy rating||340 Joules|
|Filtering||Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449|
|Maximum Height||157.00 mm|
|Maximum Width||137.00 mm|
|Maximum Depth|| |
|Net Weight||13.18 KG|
|Shipping Weight||14.55 KG|
|Shipping Height||279.00 mm|
|Shipping Width||273.00 mm|
|Shipping Depth||495.00 mm|
|Operating Environment|| |
0 - 40 °C
|Operating Relative Humidity||0 - 95%|
|Operating Elevation||0-3000 meters|
|Storage Temperature||-15 - 45 °C|
|Storage Relative Humidity||0 - 95%|
|Storage Elevation||0-15000 meters|
|Audible noise at 1 meter from surface of unit||55.00 dBA|
|Online Thermal Dissipation||90.00 BTU/hr|
|Regulatory Approvals||CE, UL 1778|
|Standard Warranty||2 years repair or replace|
|Sustainable Offer Status|
|REACH: Contains No SVHCs|
*Box quantity refers to the number of units contained in this product's outer packaging. It does not refer to the number of products purchased for the quoted unit price unless otherwise stated.
APC SUA750IX38 Smart UPS 750VA 230V USB with UL approval
- Brand: APC
- Product Code: APC SUA750IX38 Smart UPS
- Availability: In Stock Ships in 1-2 days
Are you a VAR / Distributor?
Up to 15% Commission.
No MOQs. No Signup Fees.
Portable Server Room Diagnostic Sensor Toolkit
Despite advances in CFD software and pre-deployment simulations of data center environments. The majority of server rooms, remote sites and data centers are not designed to handle ever increasing loads and the heat generated by that increased activity.
WIRELESS WORKFLOW enables early diagnostics of any server room or data center facility. Detecting problems arising from under or over cooling, hot air re-circulation in IT rack space and air delivery resulting in high or low air pressure in raised floors and dropped ceiling plenums.Read the full article
Diagnosing server room temperature problems
Diagnose temperature differentials, pressure differentials and more...
AVTECH Room Alert 12E - Sensor Monitoring
Monitor temperature, humidity, power, room access and more...
AKCP SP2+ Temperature Monitoring
SP2+ monitors and logs temperature, humidity and more. SNMPv3 compliant, encrypted email and more...
Smart Cooling for Data Centers
Keeping temperatures in ASHRAE safe thermal envelopes.
AKCP SP2+ Temperature Sensor for Server Rooms
Front and rear thermal mapping for any server cabinet.
Monitor and manage server room environmental and security conditions over an IP network.