APC Smart-UPS VT 30kVA 400V w/3 Batt Mod Exp to 4, Start-Up 5X8, Int Maint Bypass, Parallel Capable
Increases total power capacity by using multiple uninterruptible power supplies simultaneously.
Power the connected equipment with multiple uninterruptible power supplies to increase system redundancy
Dual mains input
Increases availability by allowing the UPS to be connected to two separate power sources.
Allows additional run time to be quickly added as needed.
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Ensures clean, uninterrupted power to protected equipment when generator power is used.
Automatic internal bypass
Supplies utility power to the connected loads in the event of a UPS power overload or fault.
Battery modules connected in parallel
Delivers higher availability through redundant batteries.
Battery replacement without tools
Enables fast battery replacement, lowering Mean Time to Repair (MTTR).
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Shippable with modules installed
Enables pre-installation UPS staging and testing and faster installation.
Provides fast serviceability and reduced maintenance requirements via self-diagnosing, field-replaceable modules.
Provides remote power management of the UPS over the network.
InfraStruXure Manager Compatible
Enables centralized management via the APC InfraStruXure Manager.
Alpha-Numeric Display which displays system parameters and alarms.
Provides notification of changing utility power and UPS power conditions
Ensures compatibility with different input frequencies.
LED status indicators
Quickly understand unit and power status with visual indicators.
Customize UPS capabilities with management cards.
Total Cost of Ownership
Input power factor correction
Minimizes installation costs by enabling the use of smaller generators and cabling.
Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
Manual maintenance bypass
Reduces installation costs by eliminating the need for an external mechanical bypass.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Frequency and voltage regulation
Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Provides temporary battery power when the utility power is out.
|Output Power Capacity||24 kW / 30 kVA|
|Max Configurable Power||24 kW / 30 kVA|
|Nominal Output Voltage||400V 3PH|
|Output Voltage Note||Configurable for 380 : 400 or 415 V 3 Phase nominal output voltage|
|Efficiency at Full Load||96.4%|
|Output Voltage Distortion||Less than 5% at full load|
|Output Frequency (sync to mains)||47 - 53 Hz for 50 Hz nominal|
|Other Output Voltages||380, 415|
|Crest Factor||3 : 1|
|Topology||Double Conversion Online|
|Waveform Type||Sine wave|
|Output Connections||(1) Hard Wire 4-wire (3PH + G) |
(1) Hard Wire 5-wire (3PH + N + G)
(1) Screw Terminals
|Bypass||Built-in Maintenance Bypass, Built-in Static Bypass|
|Nominal Input Voltage||400V 3PH|
|Input Frequency||40 - 70 Hz (auto sensing)|
|Input Connections||Hard Wire 5-wire (3PH + N + G)|
|Input voltage range for main operations||304 - 477V|
|Other Input Voltages||380, 415|
|Maximum Input Current||41A|
|Input Breaker Capacity||63.0 A|
|Batteries & Runtime|
|Included Battery Modules||3|
|Available Battery Module Slots||1|
|Typical recharge time||5 hour(s)|
|Nominal Battery Voltage||+/-192 V (split battery referenced to neutral)|
|End of Discharge Battery Voltage||+/-154 V|
|Extended Run Options||APC Smart-UPS VT 30kVA 400V w/3 Batt Mod Exp to 4, Start-Up 5X8, Int Maint Bypass, Parallel Capable|
|Communications & Management|
|Interface Port(s)||DB-9 RS-232, Smart-Slot|
|Pre-Installed SmartSlot™ Cards||AP9631|
|Control panel||Multi-function LCD status and control console|
|Audible Alarm||Audible and visible alarms prioritized by severity|
|Emergency Power Off (EPO)||Yes|
|Maximum Height||1499.00 mm|
|Maximum Width|| |
|Maximum Depth|| |
|Net Weight||536.82 KG|
|Shipping Weight||568.18 KG|
|Shipping Height||1643.00 mm|
|Shipping Width||650.00 mm|
|Shipping Depth||1062.00 mm|
|Units per Pallet||1.00|
|Operating Environment||0 - 40 °C|
|Operating Relative Humidity||0 - 95%|
|Operating Elevation||0-999.9 meters|
|Storage Temperature||-50 - 40 °C|
|Storage Relative Humidity||0 - 95%|
|Storage Elevation|| |
|Audible noise at 1 meter from surface of unit||55.00 dBA|
|Online Thermal Dissipation||3685.00 BTU/hr|
|Protection Class|| |
|Regulatory Approvals||C-tick, CE, EN 50091-2, EN/IEC 62040-3, IEC 61000-3-2, IEC 61000-3-3, ISO 14001, ISO 9001, VFI-SS-111|
|Standard Warranty||1 year repair or replace, Start-Up Service|
Includes: Battery modules ship installed, Bolt down brackets, CD with software, Installation guide, Network Management Card, Power modules ship installed, Start up included, User Manual
*Box quantity refers to the number of units contained in this product's outer packaging. It does not refer to the number of products purchased for the quoted unit price unless otherwise stated.
APC SUVTP30KH3B4S Smart-UPS VT 30kVA 400V with 3 Battery Modules
- Brand: APC
- Product Code: APC SUVTP30KH3B4S Smart-U
- Availability: In Stock Ships in 1-2 days
Are you a VAR / Distributor?
Up to 15% Commission.
No MOQs. No Signup Fees.
Portable Server Room Diagnostic Sensor Toolkit
Despite advances in CFD software and pre-deployment simulations of data center environments. The majority of server rooms, remote sites and data centers are not designed to handle ever increasing loads and the heat generated by that increased activity.
WIRELESS WORKFLOW enables early diagnostics of any server room or data center facility. Detecting problems arising from under or over cooling, hot air re-circulation in IT rack space and air delivery resulting in high or low air pressure in raised floors and dropped ceiling plenums.Read the full article
Diagnosing server room temperature problems
Diagnose temperature differentials, pressure differentials and more...
AVTECH Room Alert 12E - Sensor Monitoring
Monitor temperature, humidity, power, room access and more...
AKCP SP2+ Temperature Monitoring
SP2+ monitors and logs temperature, humidity and more. SNMPv3 compliant, encrypted email and more...
Smart Cooling for Data Centers
Keeping temperatures in ASHRAE safe thermal envelopes.
AKCP SP2+ Temperature Sensor for Server Rooms
Front and rear thermal mapping for any server cabinet.
Monitor and manage server room environmental and security conditions over an IP network.