• AKCP sensorProbe2 PoE & 1ft Temperature & Humidity Sensor
Buy the AKCP SP2+

The AKCP sensorProbe2+ SP2+ has now been released
Optional 3G Modem, VPN, SNMPv3 and full compliment of sensors available

Simple, Accurate and Rugged, AKCP sensorProbe2 PoE & 1ft Temperature & Humidity Sensor is a lower cost computer room temperature monitor. It is SNMP enabled and Web-Based Environmental  Monitoring Device.

Based on years of Industry Experience it’s ready to run right out of the box, simply assign the IP address and connect to the embedded web server. sensorProbe2 has been field-proven & versatile measurement options. It can be configured to prevent specific kinds of exposure to humidity, water leakage, gas, airflow and low / high temperature, etc.

It does support other sensors which can monitor voltage drop, security, analog and dry contacts. It is customizable to any other sensors like Motion, Gas and Sound Sensors. A wide range of our intelligent sensors are supported. Plug any sensor into the sensorProbe2 and our autosense feature will recognize the type and automatically configure it.

The sensorProbe2 monitors your equipment’s environmental variations, and notifies you through “Email or SNMP Alerts in your Network Management system” in advance and prevents any disaster.

The user-friendly web interface allows you to monitor and control the sensorProbe2 from anywhere remotely. It also provides you the graphical representation of environmental conditions.

sensorProbe2 has been tightly integrated & Network Management Systems like HP Openview, CA TNG Unicenter, IBM Tivoli and WhatsUp Gold.

 

Features

 

The sensorProbe2 is designed to run for years non-stop. Our simple port system system allows you to setup the sensorProbe2 &in minutes.

  • Includes SNMP MIB and Integrated Software
  • Supports all Major Communications Protocols
  • Embedded Web Server
  • Supports up to 2 Intelligent Sensors
  • Supports up to 10 Dry Contact Inputs *Use two 5DCS sensors and the DCUPGSP2 Code.
  • Full SNMP v1 compliance
  • Includes SNMP MIB
  • Includes SNMP Utilities for setting and getting parameters
  • Supports SNMP polling to allow sensor values to be collected and graphed
  • Send Trap Notifications
  • Send Email Notifications
  • Include Sensor Description and current Sensor Values in Notifications
  • User configurable Sensor Thresholds
  • Use the built in “Continuous Time” feature to eliminating false alerts and notifications
  • Optional PoE (Power over Ethernet) that is IEEE 802.3af compliant
  • 100MB Full Duplex Ethernet port


Specifications

Dimension

 

  • Size 4.5″ x 2.5″ x 1.25″
  • Weight : 0.3 Kg
Inputs

 

  • 2 RJ-45 ports for connecting
  • AKCess Pro sensors
  • Up to 10 dry contact inputs
Operating Environment

 

  • Temperature : Min. -35° C – Max.80° C
  • Humidity : Min. 20% – Max. 80% (Non-Condensing)
Power Requirements

 

  • Voltage 7.5 – 9 V / >= 1.2 Amp
Network Interface

 

  • Standard 100MB Full Duplex Ethernet RJ-45 Port
Output

 

  • Configurable output signals (0VDC/5VDC) on any of the 2 RJ-45 sensor ports
Power Over Ethernet

 

  • SP2 PoE is IEEE 802.3af  compliant
Status Indicators

 

  • LED indication for Power
  • LED for Network Connectivity
  • LED for sensor online and threshold status
Components

 

  • Manufactured using highly integrated, low power surface mount technology to ensure long term reliability.
Power Consumption

 

  • 1.125 Watt, 0.15A
Mounting Kits

 

  • 0u rack-mount, or wall hanging
MTBF

 

  • 1,400,000 Hours

Write a review

Please login or register to review

AKCP sensorProbe2 PoE & 1ft Temperature & Humidity Sensor

  • $390.00



Are you a VAR / Distributor?
Up to 15% Commission.
No MOQs. No Signup Fees.

Tags: akcp, sensorprobe2, data center monitoring, crac monitoring, ip temperature



Featured Article

Portable Server Room Diagnostic Sensor Toolkit

Despite advances in CFD software and pre-deployment simulations of data center environments. The majority of server rooms, remote sites and data centers are not designed to handle ever increasing loads and the heat generated by that increased activity.

WIRELESS WORKFLOW enables early diagnostics of any server room or data center facility. Detecting problems arising from under or over cooling, hot air re-circulation in IT rack space and air delivery resulting in high or low air pressure in raised floors and dropped ceiling plenums.

Read the full article

Diagnosing server room temperature problems

Diagnose temperature differentials, pressure differentials and more...


AVTECH Room Alert 12E - Sensor Monitoring

Monitor temperature, humidity, power, room access and more...


AKCP SP2+ Temperature Monitoring

SP2+ monitors and logs temperature, humidity and more. SNMPv3 compliant, encrypted email and more...

Smart Cooling for Data Centers

Keeping temperatures in ASHRAE safe thermal envelopes.


AKCP SP2+ Temperature Sensor for Server Rooms

Front and rear thermal mapping for any server cabinet.


NTI Enviromux Micro-T SNMP Temperature Sensor

Monitor and manage server room environmental and security conditions over an IP network.


CTSI Limited - Complete Technology Systems Integration

At CTSI we've worked with some of the largest companies in the world, bringing our expertise to bear on many complex server room monitoring projects. Feel free to contact us today at sales@ctsilimited.com and make your project a success.